Abstract:The gas-solid vertical single helical ribbon agitated reactor is widely used in the polypropylene industry. The gas flow and mass transfer determine the heat transfer capacity and product quality. In this work, the pressure drop was measured below and above minimum fluidization velocity (umf). Then, the axial and radial dispersion coefficients (DL and DR) were estimated below umf by measuring the step residence time distribution and the stationary radial tracer profiles, respectively. Pressure analysis show the agitation significantly reduces the bed pressure drop, changing the fixed bed below umf and bubbling bed above umf to an agitated bed with a periodic voidage. The DL was proportional to the gas velocity, with little influences of the stirring speed. The radial tracer profiles show the bed is divided by the inner diameter of the helical ribbon into the peripheral ascending region and the central descending region, without gas exchange between them. Furthermore. the tracer profiles in the descending region are classified into two types. For type I, the DR, calculated by the plug flow model with radial dispersion, is proportional to the gas velocity, with little effects of stirring speed. Type II shows uniform profiles due to the deflection of the gas flow toward the low pressure area at the inner diameter of helical ribbon. The causes of the two types are explained by the relative size of particle circulation and gas flux. These two flow regimes are quantitatively clarified with an empirical correlation of Re and Fr as flow regime transition boundary, namely dispersed plug flow and perfect mixing flow. With lower Re and higher Fr, it changes from dispersed plug flow to perfect mixing flow.

MODELING OF LOOP REACTOR FOR POLYPROPYLENE SPHERIPOL TECHNOLOGY

Numerical Analysis of Industrial Styrene Polymerization in Nonideal Tower Reactors

Modeling and Analysis of New Reactor Concepts for Poly(ethylene Terephthalate) Esterification Process

Integration of CFD and Polymerization for an Industrial Scale Cis-Polybutadiene Reactor

The Capacity Expansion of Hypol Polypropylene Plant by Process Reconstruction

Simulation in a Loop Reactor for Polypropylene under a Steady Operating Condition

Modeling of an Industrial Polycondensation Process for Polyethylene Terephthalate

Graft Copolymerization of Styrene and Acrylonitrile in the Presence of Poly(propylene Glycol): Modeling and Simulation of Semi‐Batch and Continuous Processes

CFD Modeling of Styrene Polymerization in a CSTR

Modeling of Coesterification Process for Biodegradable Poly(Butylene Succinate-co-Butylene Terephthalate) Copolyesters

An Analysis on Model of a Loop Reactor for Polypropylene Under a Steady Operating Condition

SIMULATION FOR LIQUID PHASE BULK PROPYLENE POLYMERIZATION IN LOOP REACTOR AT STEADY OPERATION CONDITIONS

Mixing Effects on the Gas Flow and Mass Transfer in a Vertical Single Helical Ribbon Agitated Reactor for Propylene Polymerization

Quality Predicting Models for Ethylene Terpolymerization to High-Performance Polyethylene

Steady-state Particle Size Distribution Modeling of Polypropylene Produced in Tubular Loop Reactors

Steady-State and Dynamic Modeling of the Basell Multireactor Olefin Polymerization Process

Steady-state and Dynamic Modeling of Commercial Bulk Polypropylene Process of Hypol Technology

Optimization of Grade Transition for Continuous Propylene Polymerization Process Using Continuous Stir Reactor in Series Technology

STEADY-STATE MODELING OF COMMERCIAL LIQUID PHASE BULK PROPYLENE POLYMERIZATION

A Dynamically Distributed Reactor Model for Identifying the Flow Fields in Industrial Loop Propylene Polymerization Reactors

Steady-State and Dynamic Modeling of the Solution Polyethylene Process Based on Rigorous PC-SAFT Equation of State