Abstract:The gas-solid vertical single helical ribbon agitated reactor is widely used in the polypropylene industry. The gas flow and mass transfer determine the heat transfer capacity and product quality. In this work, the pressure drop was measured below and above minimum fluidization velocity (umf). Then, the axial and radial dispersion coefficients (DL and DR) were estimated below umf by measuring the step residence time distribution and the stationary radial tracer profiles, respectively. Pressure analysis show the agitation significantly reduces the bed pressure drop, changing the fixed bed below umf and bubbling bed above umf to an agitated bed with a periodic voidage. The DL was proportional to the gas velocity, with little influences of the stirring speed. The radial tracer profiles show the bed is divided by the inner diameter of the helical ribbon into the peripheral ascending region and the central descending region, without gas exchange between them. Furthermore. the tracer profiles in the descending region are classified into two types. For type I, the DR, calculated by the plug flow model with radial dispersion, is proportional to the gas velocity, with little effects of stirring speed. Type II shows uniform profiles due to the deflection of the gas flow toward the low pressure area at the inner diameter of helical ribbon. The causes of the two types are explained by the relative size of particle circulation and gas flux. These two flow regimes are quantitatively clarified with an empirical correlation of Re and Fr as flow regime transition boundary, namely dispersed plug flow and perfect mixing flow. With lower Re and higher Fr, it changes from dispersed plug flow to perfect mixing flow.

Optimization of Grade Transition for Continuous Propylene Polymerization Process Using Continuous Stir Reactor in Series Technology

OPTIMAL GRADE TRANSITION IN CONTINUOUS POLYMERIZATION PROCESS

Optimization of grade transition for high-density polyethylene continuous slurry process

Study on Optimal Strategy of Grade Transition in Industrial Fluidized Bed Gas-Phase Polyethylene Production Process

Optimal Grade Transition of Polymerization Process with Path Constraints

Review of Grade Transition in Continuous Polyolefin Production Process

A Heuristic Approach to Grade Transition Strategy of the HDPE Slurry Process in Different Operation Modes

The Capacity Expansion of Hypol Polypropylene Plant by Process Reconstruction

Simultaneous Optimization and Control for Polypropylene Grade Transition with Two-Layer Hierarchical Structure

Numerical Analysis of Industrial Styrene Polymerization in Nonideal Tower Reactors

Customization of Particle Size Distribution in Continuous Polymerization Process

Grade Transition Control Strategy for Propylene Polymerization with a Dual-Loop Reactor

Optimal Grade Transition for Polymerization Using a Novel Sequential Evolution Algorithm

Optimal Grade Transition Based on Residence Time Distribution of Catalyst Particles in Bimodal Polyethylene Production Process

Mixing Effects on the Gas Flow and Mass Transfer in a Vertical Single Helical Ribbon Agitated Reactor for Propylene Polymerization

ARX-NNPLS Model Based Optimization Strategy and Its Application in Polymer Grade Transition Process*

Effect of Temperature Switching and Dynamic Phase Equilibrium on Polymer Microstructure in Condensed-Mode Operation

Dynamic simulation of grade transition for ethylene slurry polymerization process based on simultaneous approach

Optimal Flowsheet Configuration of a Polymerization Process with Embedded Molecular Weight Distributions

A novel strategy for dynamic optimization of grade transition processes based on molecular weight distribution

Modeling and steady state multiplicity analysis of gas phase polypropylene horizontal stirred bed reactor