Abstract:Numerical simulation and model testing are the main research methods of solving geo-technical and underground problems. In the 1980s, physical simulation (model testing) was one of the most popular methods to solve these types of problems, but since then, with the rapid development of IT technology, numerical simulations have rapidly become dominant. However, the complexity and uncertainty of geological conditions and geo-technical engineering problems represent a great challenge to the numerical method, leading some researchers to question how far numerical simulation can go. In this case, the physical simulations have begun to reappear in research and the use of physical models has seen valuable progress. In the past, problems have been solved either with physical simulation or numerical simulation, or just by comparing the results of these two methods simply. But very little attention has been paid to the question of how to combine the advantages of both and improve them. In the 3-D geo-mechanical model of the underground caverns of the Xiluodu hydropower station, the advantages of the two methods were combined and some of the primary principles of the numerical method were combined with the physical model process. Considering that the boundary condition has a great effect on the stress distribution, a larger test model was set up. The numerical discrete principle was also been used to simulate an initial geo-stress field. The basic principle of cavern excavation according to requires that loading comes first, followed by excavation. According to this idea, we developed a new technique, in which a high fidelity simulation of the excavation process and a very difficult cavern excavation were successfully achieved for the first time. The new method produced test results more satisfactory, and this simulation represents an obvious improvement of existing techniques. We also conducted a numerical simulation with almost the same conditions, and compared the results of the model test and the numerical simulation.

Application of FBG to 3D Geomechanical Model Test of Large Underground Caverns

Instability Mechanism of Shallow Tunnel in Soft Rock Subjected to Surcharge Loads

APPLICATION OF FBG SENSOR TO INTERNAL DISPLACEMENT MONITORING OF SURROUDING ROCK

An Efficient Method for Evaluating the Ground Surface Settlement of Hangzhou Metro Deep Basement Considering the Excavation Process

Application of Fiber Bragg Grating Sensor in PHC Pipe Pile: Axial Force Test

Application of numerical analysis principles and key technology for high fidelity simulation to 3-D physical model tests for underground caverns

Fiber Optic Monitoring of an Underground Excavation Model Text

Safety monitoring of railway tunnel construction using FBG sensing technology

DEVELOPMENT AND APPLICATION OF NEW TECHNOLOGY FOR 3D GEO-MECHANICS MODEL TEST OF LARGE UNDERGROUND HOUSES

DESIGN AND RESEARCH ON CONCEALED EXCAVATION SYSTEM FOR 3D GEO-MECHANICAL MODEL TEST OF LARGE UNDERGROUND HOUSES

A Novel Large-Scale Three-Dimensional Physical Model Experimental System for Deep Underground Engineering

Performance evaluation of buried pipe under loading using fiber Bragg grating and particle image velocimetry techniques

TRIFARIOUS FBG SENSOR STRAIN TRANSFER CHARACTERISTICS AND ITS APPLICATION TO TUNNEL EXCAVATION MODEL TEST

Development and Application of a Three-Dimensional Geo-Mechanical Model Test System Under Hydro-Mechanical Coupling

Study of FBG Strain Sensors Based on Similar Materiel in Zonal Disintegration Model Test

Experimental study of a 3D printed geogrid embedded with FBG sensor for reinforcement of subgrade with underlying cave

Application and Consideration of Using Fiber- Sensor Measurement in a 3D Geo-Mechanical Model Test

Application of Fiber Bragg Grating Sensor in Geomechanical Model Test of Arch Dam

Geomechanical Model Test Of Underground Caverns In Salt Rock

Fiber Bragg grating test system and model tests based on geotechnical centrifuge

Monitoring Internal Displacements of a Model Dam Using FBG Sensing Bars