Abstract:This paper presents a new protection scheme for high-speed protection of transmission lines, the Integrated Positional Protection scheme. The concept of integrated protection is firstly introduced, in which a centralized protection relay provides the protection for multiple transmission lines. The proposed scheme is based on a specially integrated relay unit, which is installed at each substation of a network and responsible for the protection of all the line sections associated with the substation. The relay based on the detection and processing of fault generated high frequency transient current signals incorporates two novel protection principles and their application techniques, which are the positional protection techniques with and without the synchronization of Global Positioning System (GPS) respectively. The technique without the need for GPS synchronization is a non-unit protection technique, which does not require a communication link. The decision to operate is based on the detection of the relative arrival times of these high frequency components at the relay location as they propagate through the system. The basic principle of the GPS based technique is to detect the fault generated high frequency transient signals and record the time instant corresponding to when the initial travelling wave generated by the fault arriving at that busbar. A communication gateway is used to transmit and receive coded digital signals of the local information to and from the associated relay(s) in the system. At each substation, the relays determine the location of the fault by comparing the GPS time stamps measured locally with those received from the adjacent substations. Simulation studies of the scheme were carried out to examine the response to different power system and fault conditions. Results show that the scheme is insensitive to fault type, fault resistance, fault inception angle and system source configuration, and is able to offer both very high accuracy and - speed in fault detection.

A Positional Polarity Comparison Relay Utilizing Global Positioning System

Integrated Positional Protection Of Transmission Systems Using Global Positioning System

Transient Polarity Comparison for Integrated Protection of Distribution Network

A centralized protection scheme based on combined positional protection techniques

Integrated Protection Of Distribution Lines Using Transient Comparison Technique

Integrated Protection of Transmission Network Using a New Directional Approach

Transient Polarity Comparison Based Protection For System With Power Electronic Interfaced Distributed Generation Units

The Integrated Protection for Power Network

Combined positional and boundary protection for transmission lines

Application of Transient Polarity Comparison Technique to Power System Protection

Protection of Transmission Systems Using Transient Polarity Comparison Technique

Integrated Protection Unit Design for Power Networks

Novel directional comparison protection for distribution lines

Traveling-wave Differential Relay Scheme for Double-circuit Parallel Lines on the Same Pole

Adaptive Directional Relay and Direction Comparison Protection Based on Instantaneous Power for UHV Transmission Lines

Integrated Protection of Power Systems

Polarized Current Travelling-wave Based Directional Relay

A RELIABLE DIRECTIONAL RELAY BASED ON POSITIVE SEQUENCE COMPENSATED VOLTAGE AND CURRENT COMPONENTS

Performance analysis of multiphase compensated distance relay in single-phase-to-ground fault with power swing

Adaptive Distance Relay for Preventing Error Action of Reactive Fault

Distance Protection That Insensitive to Power Swing