Abstract:Using ultra-high-frequency (UHF) method in practical partial discharge (PD) detection can be affected by the positioning and placement of the UHF sensor. This in turn can affect the PD diagnosis. To ensure optimal performance of the sensor and understand the propagation process of electromagnetic (EM) wave, there is a need to fully analyze how the sensor's placement affects the output signal and the attenuation of EM wave in various positions and directions. As the previous researches are mainly concentrating on the radial component of the UHF signal, the propagation of the signal components in axial and radial directions and that perpendicular to the radial direction of the GIS tank are investigated in detail in this paper. Firstly, the attenuation of UHF signals at different radial positions of a GIS model is analyzed using the finite difference time domain (FDTD) method. Then, secondly, the coupled signals in the three directions are calculated respectively. By comparing the signal received for different directions and circumferential angles, the peak to peak value (Vpp) and cumulative energy of the coupled voltage in each case are considered both in the time and frequency domain. As well, the attenuation characteristics and rules are summarized, based on which a new method for circumferential and axial location is proposed. The investigation on the propagation and the detection mechanism of EM wave in GIS provides a significant understanding of the application of UHF sensor and actual PD detection.

Simulating propagation characteristic of UHF signal for PD monitoring in transformers by FDTD technique

The Propagation Characteristics of UHF Partial Discharge in Power Transformers with Complex Winding Structure

Simulation of the Propagation Characteristic of Ultra High Frequency Signals Excited by Partial Discharge in Power Transformers

Propagation Characteristic Study Of Partial Discharge Uhf Signal Outside Transformer

Simulation Study on Selection of Install Location for UHF Sensor in Power Transformer

FEM simulation of PD acoustic signal propagation in transformers

Experimental Study for Outside Propagation Characteristic of the UHF Signal Emitted by Partial Discharge in Transformers

UHF Signal External Detection of Partial Discharge in Transformers

Simulation Study on Ultrasonic Signal Propagation Characteristics of Partial Discharge in Transformers

Application of Ultra-high-frequency Partial Discharge Detection in Power Transformers

Emulational Study on the Propagation of UHF Signal Emitted by PD in Transformers

The Propagation Characteristics Of Electromagnetic Wave Generated From Partial Discharges In Power Transformer By Fdtd Simulation

Investigation of the UHF Partial Discharge Detection Characteristics of a Novel Bushing Tap Sensor for Transformers

Simulation of Ultrasonic Wave Propagation of Partial Discharge in Converter Transformer

Investigation on Propagation Characteristics of PD-induced Electromagnetic Wave in T-Shaped GIS Based on FDTD Method.

A Novel Partial Discharge Detection Method for Power Transformers on Site Adopting Its Component As Ultra-High Frequency Sensor

Study on a Partial Discharge Detection Method for Transformers Adopting the End Shield As UHF Sensor

Field test on a transformer for partial discharge location by uwb-rf method

A Joint Simulation of UHF Signal Generation and Propagation Based on Pulsed Current Model of Partial Discharge

Propagation Characteristic of Partial Discharge Ultra High Frequency Signals Outside Transformer

Study on the Ultra-High-frequency Sensors for PD Detection in Power Transformer