Abstract:In response to the call for environment protection, more and more researches have been finding new alternative refrigerants which are of zero Ozone depleting potential (ODP), low global warming potential (GWP) and will be efficient, inflammable, and nontoxic to replace the HCFCs and HFCs refrigerants. Non-azeotropic mixtures of suitable fluids are becoming the important candidates of that search race. In this paper, the flow and heat transfer performance of CO2-DME (dimethyl ether) mixture refrigerants at 8.0 MPa in a horizontal tube was numerically investigated. In particular, this work has been focused upon the laminar heat transfer characteristics of CO2-DME mixture refrigerant flow with Reynolds number ranging from 180 to 1800 and the mass fraction of DME ranging from 21% to 39%. The results show that the heat transfer performance of the mixture fluid can be improved when the mass fraction of DME increases to 30%. Considering both the best heat transfer performance and the safety, the optimum component of CO2-DME (70/30, mass%) has been found in this study. And the mechanisms that are responsible for the heat transfer enhancement are obtained and they are: (1) The temperature gradient of CO2-DME mixture fluid with high mass fraction of DME is larger than that of CO2-DME mixture fluid with low mass fraction of DME; in addition, the temperature gradient increases with the mass fraction of DME; (2) The increase of thermal conductivity for CO2-DME mixtures can enhance the heat transfer performance to a large extent. (3) The self-acceleration characteristic of the supercritical mixture fluid is also beneficial to the heat transfer enhancement. Furthermore, it is found that the heat transfer performance of the mixture fluid can also be improved with Reynolds number. The viscous boundary layer of the fluid becomes thinner when the Reynolds number increases, which leads to an enhancement in heat transfer. In addition, at high Reynolds number, the flow is tend to be turbulent, which is beneficial to the heat transfer performance of mixture fluid. With regard to the flow characteristic of mixtures, first the flowing changes depend on the temperature and the density of fluid to a large extent-the high value of velocity can occur when the fluid has a high temperature and a low density. And secondly, the supercritical CO2-DME mixtures speed up along the tube and make themselves different with water flow. These results of this study have significant implications for the design of high-performance heat exchangers, using CO2-DME mixture as the working fluid.

Experimental Investigation on Heat Transfer of Co(2) Solid-Gas Two Phase Flow with Dry Ice Sublimation

Study on the CO[sub 2] Solid-Gas Two Phase Flow with Particle Sublimation and Its Basic Applications

Basic study on new cryogenic refrigeration using CO2 solid–gas two phase flow

1846 Study on Characteristic of Novel CO_2 Heat Pump with Cryogenic Temperature

Study on Flow Boiling Heat Transfer Characteristics of R161/oil Mixture Inside Horizontal Micro-Fin Tube

A Research on the Dryout Characteristics of CO 2 'S Flow Boiling Heat Transfer Process in Mini-Channels

Investigation of Flow Boiling Heat Transfer Characteristics of CO2in Horizontal Mini-Tube

Characteristics of Heat Transfer for CO2 Flow Boiling at Low Temperature in Mini-Channel

Characteristics of Heat Transfer for CO2 Flow Boiling in Mini_channel

EXPERIMENTAL STUDY ON EVAPORATING HEAT TRANSFER OF CO2 IN THIN TUBE

Visualization Experiments of a Novel CO2 Solid-Gas Two Phase Flow Based Refrigeration System

Experimental study of double direct contact ice slurry generator

Study of Heat Transfer for Co2 Flow Boiling in Horizontal Small Diameter Tubes

A Numerical Study on Heat Transfer Characteristics of CO2-DME Mixture Fluid

402 Flow and Heat Transfer Performance of Natural Refrigerant-Supercritical CO_2

A Novel CO2 Refrigeration System Achieved by CO2 Solid–gas Two-Phase Fluid and Its Basic Study on System Performance

Experimental Study Of Boiling Heat Transfer Of Subcritical Co2 In Horizontal Small Diameter Tubes

EXPERIMENTAL INVESTIGATION OF CONVECTION HEAT TRANSFER OF CO_2 AT SUPERCRITICAL PRESSURES IN VERTICAL CIRCULAR TUBE

Heat Transfer Performance Analysis on the CO2 Two-phase Thermosyphon Loop

Experimental and Simulation Investigation on Heat Transfer Characteristics of In-Tube Supercritical CO2 Cooling Flow

Microscale heat transfer and phase change mechanisms of carbon dioxide at near-critical conditions