Abstract:Laser-based diagnostic techniques are critical nonintrusive methods of measuring the in-situ temperature in combustion flow fields. Developing temperature measurement techniques with high accuracy and precision is of great significance for studying the combustion. At present, nanosecond (ns) lasers are commonly used in these methods. However, the researches based on femtosecond (fs) lasers are relatively few. Here, we develop a thermometry technique for combustion fields based on fs laser-induced filament. When the fs laser propagates in an optical medium, a long uniformly distributed plasma channel (also named filament) will be generated. The clamped intensity inside the filament is high enough to generate excited atoms/molecules through fs laser-induced photochemical reactions. Subsequently, the excited atoms/molecules release fluorescence signals. The length of the filament can be measured by imaging the fluorescence signal with an ICCD camera, which is evaluated by the full width at half maximum (FWHM) of the spatial distribution of the filament emission signal. Based on theoretical analysis, the experimental data of the filament length are fitted with a power function, and the result is satisfactory compared with the R-squared measure of goodness (R2) of 0.984. This indicates that the filament length is correlated well with the temperature of the combustion field. A monotonic quantitative relationship between the filament length and the temperature can be established by a calibration process, and then the temperature of the combustion field can be measured. When the temperature changes from 1630 to 2007 K, the length of the filament shortens by 38%. This indicates that the filament length is sensitive to the temperature of the flow field. When the temperature is 2007 K, the absolute uncertainty of the measurement is ±25 K, and the relative uncertainly is about 1.2%. The spatial resolution of the measurement system is 50 μm, which was determined by a USAF 1951 Target. Based on the spatial resolution, the measurement precision can arrive at 17 K. Although, at present, this temperature measurement technique based on femtosecond laser-induced filament is used only in laminar premixed flames, it has potential applications in temperature measurements ranging from room temperature to combustion temperatures.

Difference in Filament and Spectrum Broadening Induced by Femtosecond Pulses in Argon Gas with a Temperature Gradient at Different Positions

Temperature Controlled Filamentation In Argon Gas

Probing the Spectrum Evolution of Femtosecond Pulse Filament in Argon Gas with a Hollow Fiber

Simulation of femtosecond laser pulse propagation in air

Experimental Observation on Spectrum Evolution of Femtosecond Pulses in Filamentation

Dependence of Spectrum Broadening on Inner Diameter of Capillary Restricting the Filamentation in High Pressure Gas

Widening Of Long-Range Femtosecond Laser Filaments In Turbulent Air

Simulation of Femtosecond Pulse Propagation Through Hollow Fibre Filled with Noble Gases of Gradient Temperature

Study Of Spectral Broadening In A Filament Of Light

Femtosecond Filamentation in Temperature Controlled Noble Gas

Low Temperature Enhancement of Alignment-Induced Spectral Broadening of Femtosecond Laser Pulses

Thz Emission Control by Tuning Density Profiles of Neutral Gas Targets During Intense Laser-Gas Interaction

Femtosecond Laser Filamentation in Atmospheric Turbulence

Two-dimensional high resolution electron properties of femtosecond laser-induced plasma filament in atmospheric pressure argon

Influence of Initial Amplitude Perturbations on Filament Length of Pre-focused Femtosecond Laser Pulses

Comparative Study on Excitation Temperature, Electron Temperature and Electron Density in an Atmospheric Argon Microwave Plasma

Numerical simulation study on distinguishing nonlinear propagation regimes of femtosecond pulses in fused silica

Analysis of laser polarization state on remote induced plasma luminescence characteristics of filament in air

Filamentation and Temporal Reshaping of A Femtosecond Pulse in Fused Silica

Filamentation of interacting femtosecond laser pulses in air

Temperature Measurement in Combustion Flow Field with Femtosecond Laser-Induced Filament