Abstract:High-speed photography was applied to visualize the flow pattern evolution of flow boiling of liquid nitrogen in an upward quartz microtube coated with a layer of transparent indium tin oxide film as the heater. The inner diameter of the employed tube was about 1.33 mm. The characteristic of nucleation site activation, which was the beginning of the flow pattern evolution, was studied visually. In the case of low heat flux and small mass flux, only a single nucleation site was activated. The departed bubbles grew to the size of the inner diameter of the tube soon and the transition from the bubbly flow to slug and annular flow occurred earlier compared to the conventional normal-sized tubes. In the case of high mass flux and high subcooling, multiple nucleation sites were activated. The interaction between adjacent nucleation sites was considered. Slug and annular flow were found to suppress the downstream nucleation site. Bubble coalescence was one of the key factors for the flow pattern evolution, and it was found that the bubble coalescence would bring about great disturbance to the adjacent nucleation site. The characteristics of bubble condensation in the subcooled liquid nitrogen were also demonstrated. Flow pattern evolution beyond the boiling crisis was also investigated. Post-dryout regimes such as inverted bubbly, inverted slug, and inverted annular flow were observed in the microtube. Flow reversal and liquid entrainment, which were relevant to flow instability in the flow pattern evolution, were demonstrated clearly.

Temperature Controlled Filamentation In Argon Gas

Difference in Filament and Spectrum Broadening Induced by Femtosecond Pulses in Argon Gas with a Temperature Gradient at Different Positions

Femtosecond Filamentation in Temperature Controlled Noble Gas

Growth of Colloidal Nanoplate Liquid Crystals Using Temperature Gradients

Abnormal Transport Properties of Argon Confined in Carbon Nanotube Driven by a Temperature Gradient

Control of Filament Branching in Air by Astigmatically Focused Femtosecond Laser Pulses

Fundamental Effects in Nanoscale Thermocapillary Flow

Visual Study of Flow Pattern Evolution of Flow Boiling in A Microtube

Plasma-resonance-assisted filament in a high-pressure microwave discharge

Design and numerical analysis of a novel argon gas tube to reduce impurities in large size casting crystalline silicon furnace

A monte carlo simulation on thermodynamic properties of argon in nano-scale tubes

Optical Plasma Control During ARC Carbon Nanotube Growth

Annealing approach to form a nanotube from graphdiyne ribbon: A theoretical prediction

Controllable Preparation of Microscale Tubes with Multiphase Co-Laminar Flow in a Double Co-Axial Microdevice

Investigations of the properties of filaments generated in gas mixtures pumped by femtosecond laser pulses

Two-dimensional high resolution electron properties of femtosecond laser-induced plasma filament in atmospheric pressure argon

Temperature Analyses in Fused Filament Fabrication: From Filament Entering the Hot-End to the Printed Parts

Characteristics Of Atmospheric Room-Temperature Argon Plasma Streams Produced Using A Dielectric Barrier Discharge Generator With A Cylindrical Screwlike Inner Electrode

Filamentation of interacting femtosecond laser pulses in air

Extending Optical Filaments with Phase-Nested Laser Beams

Simulation of Femtosecond Pulse Propagation Through Hollow Fibre Filled with Noble Gases of Gradient Temperature