Abstract:This work involved the synthesis of compositions of Ba 0.95 Ca 0.05 Sn x Ti 1-x O 3 (BCST) with varying amounts of Sn dopant (x = 0, 0.02, 0.04, 0.06, 0.08, and 0.1). A standard solid-state reaction approach was used to create all of the ceramic compounds. Each BCST composite's microstructure, sintering, morphology, density, optical, and electrical characteristics were carefully examined, and the dielectric performance was optimized. In comparison to the unmodified composite, introducing varied amounts of Sn material into the BCST compound changed the crystal lattice vibrations and functional group locations. This result indicates that there are some variations in unit cell size, revealing that Sn +4 ions diffused effectively inside the lattice structure to produce BSCT composites. Further, SEM micrographs indicated proportionate changes in the homogenous structure and irregular forms as Sn concentration increased, as well as some variation in average grain size. As a consequence, by adding 0.08 mol% of Sn dopant, the crystallite size and average grain size were adjusted to 45.69 nm and 0.66 μm, respectively. Meanwhile, the 0.08-Sn specimen displayed a dielectric constant (Ɛ) with an optimum value of 5557 and a relative decrease in the Curie-Weiss constant. These results are attributed to the existence of various concentrations of Sn ions at the Ti-site of the BCT, which resulted in a compositionally disordered state. This disordered condition is essential for the production of dielectric compounds. Therefore, it is evident that modifying the amount of Sn doping added significantly enhanced the dielectric characteristics of the BCST composites created in this work. However, excessive Sn doping reduces the dielectric properties due to a reduction in tetragonal phase and an increase of disorders and charge fluctuations.

Thickness-Dependent Dielectric And Tunable Properties Of Barium Stannate Titanate Thin Films

Investigation of Barium Stannate Titanate Thin Films for Tunable Microwave Applications

Dielectric Tunable Properties of BaTi1-xSnxO3 Thin Films Derived from Sol-Gel Soft Chemistry

Dielectric Properties Of Ba(Snxti1-X)O-3 Thin Films Grown By A Sol-Gel Process

Thickness Dependent Dielectric and Piezoelectric Properties of BNT–BT–ST Thin Films

The Microstructure Characteristics and Dielectric Behaviors of the Compositionally Graded Ba(Ti,Sn)O-3 Thin Films

Study on Compositionally Graded Epitaxial Barium Strontium Titanate Thin Films Derived from Pulsed Laser Deposition

Effect of Film Thickness on Structure and Dielectric Properties of Yttrium-Doped Ba0.6Sr0.4TiO3 Films

Dielectric characteristics of barium strontium titanate films prepared by aerosol deposition on a Cu substrate

Improved Mechanisms for Excellent Tunable Microwave Ce and Mn Codoped Ba0.6sr0.4tio3 Thin Films

Preparation of (1− x %)(Na 0.5 Bi 0.5 )TiO 3 – x %SrTiO 3 thin films by a sol–gel method for dielectric tunable applications

Preparation of (1− <i>x</i> %)(Na<sub>0.5</sub>Bi<sub>0.5</sub>)TiO<sub>3</sub>– <i>x</i> %SrTiO<sub>3</sub> thin films by a sol–gel method for dielectric tunable applications

Dielectric Characteristics and Tunability of Barium Stannate Titanate Ceramics

Influence of Film Thickness on Dielectric Properties of Y and Mn Alternately Doped Bst Films

The influence of Co doping on the dielectric, ferroelectric and ferromagnetic properties of Ba0.70Sr0.30TiO3 thin films

Ca/Sn concentration-dependent enhancement of barium titanate ferroelectric performance: a dielectric and microstructural study

Comprehensive Dielectric Performance of Alternately Doped BST Multilayer Films Coated with Strontium Titanate Thin Layers

Structural, Dielectric, and Insulating Properties of Barium Strontium Titanate Thin Films Grown on Various Oriented Laalo3 Substrates

Enhanced dielectric properties of barium strontium titanate thin films by doping modification

Preparation of (1−%)(NaBi)TiO–%SrTiO thin films by a sol–gel method for dielectric tunable applications

Structure and Dielectric Properties of Barium Titanate Thin Films for Capacitor Applications