Abstract:The stress-induced phase transformation and micromechanical behavior of CuZr-based alloy were investigated by in-situ neutron diffraction. The pseudoelastic behavior with a pronounced strainhardening effect is observed. The retained martensite nuclei and the residual stress obtained from the 1st cycle reduce the stress threshold for the martensitic transformation. A critical stress level is required for the reverse martensitic transformation from martensite to B2 phase. An increase of intensity for the B2 (110) plane in the 1st cycle is caused by the twinning along the {112}< 111> twinning system. The convoluted stress partitioning influenced by the elastic and transformation anisotropy along with the newly formed martensite determines the microstress partitioning of the studied CuZr-based alloy. The reversible martensitic transformation is responsible for the pseudoelasticity. The macro mechanical behavior of the pure B2 phase can be divided into 3 stages, which are mediated by the evolvement of the martensitic transformation.This manuscript has been authored by UT-Battelle, LLC under Contract No. DE-AC05-00OR22725 with the U. S. Department of Energy. The United States Government retains and the publisher, by accepting the article for publication, acknowledges that the United States Government retains a non-exclusive, paid-up, irrevocable, world-wide license to publish or reproduce the published form of this manuscript, or allow others to do so, for United States Government purposes. The Department of Energy will provide public access to these results of federally sponsored research in accordance with the DOE Public Access Plan (http://energy. gov/downloads/doe-public-access-plan). (C) 2016 Elsevier B. V. All rights reserved.

Pseudoelasticity of Cu–Zr Nanowires Via Stress-Induced Martensitic Phase Transformations

Surface Stress Effects On The Yield Strength In Nanotwinned Polycrystal Face-Centered-Cubic Metallic Nanowires

Strain Induced Structural Phase Transition in TM6X6 (TM = Mo, W; X = S, Se, Te) Nanowires

A Study of Stress-Induced Phase Transformation and Micromechanical Behavior of CuZr-based Alloy by In-Situ Neutron Diffraction

Mechanism for the Pseudoelastic Behavior of FCC Shape Memory Nanowires

Mechanical Behaviors of MoS Nanowires under Tension from Molecular Dynamics Simulations

Stress-Induced Martensitic Transformation of Zr50cu25ni10co15 Nanocrystals Embedded in an Amorphous Matrix

Pseudo-elasticity and ultra-high recoverable strain in cobalt nanowire: A molecular dynamics study

Anisotropic Phase Transformation in B2 Crystalline CuZr Alloy

Atomistic investigation of pseudoelasticity in zirconia nanopillars

An Examination of Surface Stress Effects and Deformation Mechanisms in Al–Cu Nanowires

Atomistic Study Of The Mechanical Response Of Copper Nanowires Under Torsion

Simulation on the effects of torsion strain on the mechanical properties of SiC nanowires under tensile and compressive loading

Anelasticity of twinned CuO nanowires

Novel Mechanical Behavior of Zno Nanorods

Pseudoelasticity in twinned α-Fe nanowires under bending

Pseudoelastic Behavior of A Cualni Single Crystal under Uniaxial Loading

Coupled effects of size and uniaxial force on phase transitions in copper nanowires.

Size-dependent Phase Transformation and Fracture of ZnO Nanowires

Inverse Martensitic Transformation in Zr Nanowires

Stress-induced phase transformation and strain rate effect in polycrystalline Mo nanowires