Abstract:Numerous molecular dynamics (MD) simulations have been performed to investigate the effect of the nanopores on the martensitic transformation (MT) of pure iron (Fe) during the heating-cooling cycle. As per the simulation results, nanopores can obviously affect the difficulty on MT during the cooling process in two ways: On the one hand, the volume ratio of nanopores to simulation box model (R p/b ) can influence the distribution configuration of stacking fault (SF) to change the type of austenite microstructure during the heating process owing to the obstruction of the nanopores on the dislocation slip. The effect of nanopores is not obvious when R p/b is less than 2.22 %. The main type of austenitic changes from defect-free/simple-SF types to the intersecting-SF type and, finally, to the dislocation-cell type with an increase in R p/b from 2.22 % to 17.9 %. The dislocations in intersecting-SF type and dislocation-cell type austenitic microstructures can provide the nucleation site of MT, thus increasing the MT temperature. On the other hand, the high surface energy of the nanopores caused by the incomplete atomic lattice can provide the necessary energy for the nucleation of martensite, which then promotes the occurrence of MT during the cooling process. When the nanopores intersect with the dislocation wall in dislocation-cell type austenitic microstructure, martensite nucleates at the nanopores surface and then grows along the dislocation wall. In the previous investigation of selective laser melting martensitic steel, the nanopore in the microstructure was generally believed harmful to the mechanical property of specimen; however, in this study, it has been observed to promote the MT during solution-quenching heat treatment, which improves the mechanical property by improving the content of martensitic phase. This provides a new perspective in determining the significance of nanopores in microstructures.

Inverse Martensitic Transformation in Zr Nanowires

Effects of Zr Addition on the Deformation Behavior, Microstructure and Mechanical Properties of Dental Ti Alloys

Shear Band Mediated Ω Phase Transformation in Nb Single Crystals Deformed at 77 K

A Molecular Dynamics Study on Mechanical Performance and Deformation Mechanisms in Nanotwinned NiCo-based Alloys with Nano-Precipitates under High Temperatures

Lattice Dynamics of Twisted ZnO Nanowires under Generalized Born–von Karman Boundary Conditions

Melting Behavior of One-Dimensional Zirconium Nanowire

Phase field simulations for the crossover from sharp martensitic transformation into smooth strain glass transition by fine precipitates

Atomic scale modeling of the coherent strain field surrounding Ni4Ti3 precipitate and its effects on thermally-induced martensitic transformation in a NiTi alloy

In situ high-energy X-ray diffraction study of thermally-activated martensitic transformation far below room temperature in CuZr-based bulk metallic glass composites

Dominant shear bands observed in amorphous ZrCuAl nanowires under simulated compression

Strain-induced structural evolution of interphase interfaces in CuZr-based metallic-glass composite reinforced by B2 crystalline phase

Tunability of martensitic behavior through coherent nanoprecipitates and other nanostructures

Dynamic Process of Phase Transition from Wurtzite to Zinc Blende Structure in InAs Nanowires.

Anomalous martensitic transformation with diffusion in the all- d -metal Heusler alloys of Ni 2 MnTi and Ni 2 MnV from first-principles investigation

The effect of nanopores on the mechanism of martensitic transformation in pure iron during the heating-cooling cycle: A molecular dynamics study

A Thermodynamic Explanation for the Martensitic Transformation of Nanometer-Sized Γ-Iron Particles Embedded in a Copper Matrix

In situ TEM studies of the stress-induced martensitic transformation in nanometric NiTi polycrystal strips

Transformation of ZIF-67 Nanocubes to ZIF-L Nanoframes

Amorphization and Directional Crystallization of Metals Confined in Carbon Nanotubes Investigated by in Situ Transmission Electron Microscopy

Deformation induced self-accommodation morphology transition from triangular to nano-twinned martensite in Ti-Nb-Zr shape memory alloys

Martensitic transformation in zirconia. Part I: nanometer scale prediction and measurement of transformation induced relief