Abstract:Polydimethylsiloxane (PDMS) is usually used to obtain favorable performances of waterborne polyurethane (WPU) such as higher hardness, exceptional thermal stability and lower interfacial tension. However, there is always a problem that waterborne polyurethane (WPU) often performs weak tensile strength, lower tenacity and brittle property at room temperature when polydimethylsiloxane (PDMS) is embedded into the backbone of polyurethane. The study aims to address the problem by constructing dual crosslinking structure, namely introducing trimethylolpropane as an intramolecular crosslinking agent into prepolymers and then adding waterborne polycarbodiimide (SK-400) as a post-crosslinking agent in order to further enlarge the degree of crosslinking and mainly make up for the shortcoming that mechanical property decreases when polydimethylsiloxane (PDMS) was inserted into molecule chains. Initially a novel inner-crosslinking prepolymer (SiWPU) comprising polydimethylsiloxane need to be synthesized successfully by inserting trimethylolpropane into prepolymers. Then the sample SiWPU-3 was picked out as a matrix resin and dropwise added polycarbodiimide (SK-400) as a post-crosslinking agent into the matrix resin (C–SiWPU). As pH was gradually lowering following the evaporation of triethylamine in the emulsion (C–SiWPU), carboxyl groups (COOH) in prepolymers started to react with SK-400 (NCN) to form twofold crosslinking structure. When 0%, 2%, 4%, 6%, and 8 wt% of waterborne polycarbodiimide (SK-400) was incorporated into the solution, the tensile strengths are 47.8 MPa, 57.7 MPa, 65 MPa, 57.6 MPa and 54.5 MPa and the elongation at break 732%, 756%, 798%, 707% and 700%. The crosslinking density of SiWPU-3 without the addition of waterborne polycarbodiimide (SK-400) is 3.86 × 10−3 mol/cm3. As 6 wt% of waterborne polycarbodiimide (SK-400) was added into the emulsion of SiWPU-3, the crosslinking density of C–SiWPU-6 (6 wt% SK-400) is 6.19 × 10−3 mol/cm3. The films show excellent extensibility and exceptional tenacity. Hence, the emulsion is able to be applied in leather industry.

Synthesis and Properties of Aqueous Polysiloxane-Polyurethane Block Copolymer

Synthesis and characterization of polyurethane–polysiloxane block copolymers modified by α,ω-hydroxyalkyl polysiloxanes with methacrylate side chain

Synthesis and Characterization of Eugenol‐based Silicone Modified Waterborne Polyurethane with Excellent Properties

Synthesis of CO2-Derived, Siloxane-Functionalized Poly(ether Carbonate)s and Waterborne Polyurethanes

Synthesis, characterization and lubricating effect of long chain branched polydimethylsiloxane-g-polyethylene copolymers

Study on Silicone Modified Polyurethane-Acrylate Copolymer Emulstion

Synthesis and Characterization of Waterborne Polysiloxane-Polyacrylates Dispersion

Study on the Water Repellent Silicone-Polyurethane Block Copolymers

Synthesis of Polyether Modified Polysiloxane Defoaming Agent

Polysiloxanes with Quaternary Ammonium and Polyether Groups for Silyl-Terminated Polypropylene Oxide Waterborne Emulsions

Partial crystalline organosilicon-based polysiloxane-polyurethane copolymers

The synthesis and properties of siloxane-urethane copolymers aqueous nanodispersion using hydroxyalkyl and hydrohxypolyester terminated polydimethylsiloxane

Mechanical and surface properties of polysulfide-based polyurea modified with aminoethylaminopropyl poly(dimethylsiloxane)

The synthesis and research of a novel organosilicon-modified waterborne blocked polyisocyanate crosslinker with a semi-interpenetrating network structure

Synthesis and Properties of Polyurethane Modified with Aminoethylaminopropyl Poly(dimethyl Siloxane)

STUDY ON SEGMENTED POLYURETHANE WITH MIXED SOFT SEGMENTS OF POLYCHLOROMETHYL METHYL SILOXANE AND POLYTETRAMETHYLENE OXIDE

Synthesis and Characterization of Polysiloxane and Acrylate Elastomer Material

Synthesis of Polyimide-Siloxane Copolymers and Their Properties

Synthesis and properties of CO2 copolymer-based waterborne polyurethane with high solid content

The Hydrogen Bonding in the Hard Domains of the Siloxane Polyurea Copolymer Elastomers

Synthesis of waterborne polyurethane by inserting polydimethylsiloxane and constructing dual crosslinking for obtaining the superior performance of waterborne coatings