Abstract:Solid-oxide fuel cells (SOFCs) technology has a substantial potential in the application of clean and efficient electric power generation. However, the widespread utilization of SOFCs has not been realized because the cost associated with cell fabrication, materials and maintenance is still too high. To increase its competitiveness, lowering the operation temperature to the intermediate range of around 500–800°C is one of the main goals in current SOFCs research. A major challenge is the development of cell materials with acceptably low ohmic and polarization losses to maintain sufficiently high electrochemical activity at reduced temperatures. During the past few decades, tremendous progress has been made in the development of cell materials and stack design, which have been recently reviewed. SOFCs are fabricated from ceramic or cermet powders. The performances of SOFCs are also closely related to the ways in which the cell materials are processed. Therefore, the optimization of synthetic processes for such materials is of great importance. The conventional solid-phase reaction method of synthesizing SOFCs materials requires high calcination and sintering temperatures, which worsen their microstructure, consequently, their electrochemical properties. Various wet chemical routes have recently been developed to synthesize submicro- to nano-sized oxide powders. This paper provides a comprehensive review on the advanced synthesis of materials for intermediate-temperature SOFCs and their impact on fuel cell performance. Combustion, co-precipitation, hydrothermal, sol–gel and polymeric-complexing processes are thoroughly reviewed. In addition, the parameters relevant to each synthesis process are compared and discussed. The effect of different processes on the electrochemical performance of the materials is evaluated and optimization of the synthesis processes is discussed and some emerging synthetic techniques are also briefly presented.

Research activities and progress on solid oxide fuel cells at USTC

Development of Low-to-intermediate Temperature Solid State Oxide Fuel Cells

Ceramic Membrane Fuel Cells: Research Progress and Prospect

Advances in Cathode Materials for Solid Oxide Fuel Cells: Complex Oxides without Alkaline Earth Metal Elements

Recent progresses in the development of tubular segmented-in-series solid oxide fuel cells: Experimental and numerical study

Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells

Progress in proton‐conducting oxides as electrolytes for low‐temperature solid oxide fuel cells: From materials to devices

Research progress of composite cathode materials for Solid oxide fuel cells

Research on electrolytes for solid oxide fuel cell

Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating below 500 °C

The Progress on Research and Development of Tubular Solid Oxide Fuel Cell Stacks

Recent Advances in Single Chamber Solid Oxide Fuel Cells

Fabrication Techniques and Stack Assembling Methods for Micro Tubular Solid Oxide Fuel Cells

Research Progress of Anode-Supported Micro-Tubular Solid Oxide Fuel Cells

A Review On Recent Advances In Micro-Tubular Solid Oxide Fuel Cells

Recent Progress on the Materials of Oxygen Ion-Conducting Solid Oxide Fuel Cells and Experimental Analysis of Biogas-Assisted Electrolysis over a LSC Anode

Development of Metal-supported Solid Oxide Fuel Cells

Development of Solid Oxide Fuel Cell Materials for Intermediate-to-low Temperature Operation

The Theory and Application Prospect of Solid Oxide Fuel Cell（ SOFC ）

Electrochemical characterization methods of the key materials for SOFC

Progress on the Anode Materials for Solid Oxide Fuel Cells (SOFC) and Its Application for Hydrogen Production through High Temperature Steam Electrolysis