Abstract:Summary Asphalt road gradually deteriorates in serviceability with insignificant damage. The deterioration begins with microcracks and continues until structural failure. To facilitate early damage prediction, this study proposes a structural self‐sensing technique based on the piezo‐resistive behavior of conductive asphalt concrete. To this end, conventional asphalt mixtures were modified into self‐sensing mixtures by adding conductive carbon fiber (CF) and iron tailings aggregates (TA) as alternatives for natural aggregates (NA). The self‐sensing response was evaluated by correlating fractional changes in electrical resistance (FCR) with the deformation of mixture within and beyond the elastic regime in response to varying stress amplitudes under fatigue cyclic compressive loading. From the results, it can be seen that the mixture exhibits sufficient mechanical strength and low resistivity to achieve a self‐sensing response. Furthermore, the self‐sensing response varies significantly with the stress amplitude. The mixture exhibits sufficient sensitivity to the compaction and deformation within the elastic regime by reversibly decreasing its electrical resistance at low‐stress, manifested as increase in negative (−) FCR. The −FCR reversibly decreases, reflecting initiation of microcracks due to increased deformation within the elastic regime at medium‐stress. However, irreversible FCR is observed at high‐stress due to increase in deformation beyond the elastic regime, which leads to fracture. After fracture, the mixture does not show sensitivity to stress and deformation owing to the cracking of internal conductive network. In conclusion, the mixture provides early damage prediction as sensitive damage sensor in the elastic regime and enables real‐time structural health monitoring (SHM) of asphalt pavements.

Research on the relationship between the loading and the conductivity of smart asphalt concrete

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

Study On The Anti-Cracking Performance Of Fibrous High-Viscoelastic Asphalt Sand

Study of the Viscoelasticity for Fibrous High ViscoelasticAsphalt Sand

The Effect of Adding Steel Fibers and Graphite on Mechanical and Electrical Behaviors of Asphalt Concrete

Numerical Analysis for Basalt Fiber Reinforced High-Viscosity Asphalt Concrete Bridge Deck Pavement

Preparation of Conductive Asphalt Concrete Based on the Action Mechanism of Conductive Phase Materials

Analysis of the Load Stress of BFRP Continuously Reinforced Composite Pavement

Self‐stress and deformation sensing of electrically conductive asphalt concrete incorporating carbon fiber and iron tailings

Investigation of using conductive asphalt concrete with carbon fiber additives in intelligent anti-icing systems

Novel Conductive Polymer Composites for Asphalt Pavement Structure in Situ Strain Monitoring: Influence of CB/CNT and GNP/CNT Nano/Micro Hybrid Fillers on Strain Sensing Behavior

Performance Experiments and Finite Element Simulation on Basalt Fiber Reinforced Asphalt Mixture

Electro-mechanical Properties of Functional Fiber-Based Rigid Pavement under Various Loads Applied on a Large-Scale in-Situ Section

Study on Low Temperature Cracking Resistance of Carbon Fiber Geogrid Reinforced Asphalt Pavement Surface Combined Body

Carbon fiber powder in sustainable asphalt pavements: Improving microwave self-healing capacity and low-temperature performance

Effect of Steel Wool and Graphite on the Electrical Conductivity and Pavement Properties of Asphalt Mixture

Study on intelligent monitoring system for long term performance of road engineering and new monitoring and sensing technology

The Innovative Self-Sensing Strain Sensor for Asphalt Pavement Structure: Substitutability and Synergy Effects of Graphene Platelets With Carbon Nanotubes in Epoxy Composites

Investigation of the Performance of Basalt Fiber Reinforced Asphalt Mixture

Reinforcement Effect of Different Fibers on Asphalt Mastic

Performance of Fiber Reinforced Asphalt Concrete under Environmental Temperature and Water Effects