Abstract:The key challenge with the design of conductive asphalt concrete lies in optimizing the balance between electrical and mechanical properties for critical performance evaluation. This study concentrates on the material design and performance improvement of conductive asphalt concrete, which exploits the intrinsic conductive behavior of carbon fiber (CF) as a smart structural material in addition to iron tailings aggregates (TA). TA is introduced as a partial substitute of natural aggregates (NA), to provide continuous conductive structural contacts throughout the mixture for improvement in electrical and mechanical performance. To achieve this goal, first TA and NA were analyzed for chemical and phase compositions. The characterization manifested that TA exhibits a complex composition consisting of different species of iron. Secondly, a materially optimized conductive mix composition was developed in terms of the balance between electrical and mechanical properties. The results indicated that the addition of 0.2%-0.4% CF by weight to the mixture concludes optimum conductive mixtures for critical performance evaluation. Moreover, it was revealed that the addition of CF with TA significantly improves the electrical and mechanical properties of mixtures. Thirdly, electromechanical testing was conducted to explore the resistance change response of optimum conductive mixtures against changes in composition (deformation) induced as a result of mechanical loading. The results indicated that resistance change response to mechanical loading depends on the mix composition, type of loading and geometry of the test specimen. The reversible and smooth variation in resistance shows a mix with good structural integrity and its ability to heal deformation during unloading. By contrast, the irreversible and discontinuous variation in resistance is referred to as the damaging of the conductive network and eventually the structural failure. The mix incorporating 0.4% CF and TA as a partial substitute of NA serves as a smart composition since it retains satisfactory mechanical strength and responds to minor and reversible effects during mechanical loading.

Effect of Steel Wool and Graphite on the Electrical Conductivity and Pavement Properties of Asphalt Mixture

Application Of Epoxy-Asphalt Composite In Asphalt Paving Industry: A Review With Emphasis On Physicochemical Properties And Pavement Performances

Multi-Walled Carbon Nanotubes Enhanced the Performance of Epoxy Asphalt Pavement Binder.

The Effect of Adding Steel Fibers and Graphite on Mechanical and Electrical Behaviors of Asphalt Concrete

Preparation and Electrical Properties of Conductive Asphalt Concretes Containing Graphene and Carbon Fibers

Investigation on Preparation and Properties of Carbon Fiber Graphite Tailings Conductive Asphalt Mixture: A New Approach of Graphite Tailings Application

Effects of emulsified asphalt on the mechanical and tribological properties of copper/graphite composites

Preparation of Conductive Asphalt Concrete Based on the Action Mechanism of Conductive Phase Materials

Simulation of snow melting pavement performance using measured thermal properties of graphite-modified asphalt mixture

Physical Properties of Graphene-Oxide Modified Asphalt and Performance Analysis of Its Mixtures Using Response Surface Methodology

Novel conductive wearing course using a graphite, carbon fiber, and epoxy resin mixture for active de-icing of asphalt concrete pavement

Performance of Hot Mix Epoxy Asphalt Binder and Its Concrete

Performance and Thermal Evaluation of Incorporating Waste Ceramic Aggregates in Wearing Layer of Asphalt Pavement

Performance Evaluation and Structure Optimization of Low-Emission Mixed Epoxy Asphalt Pavement

Investigation of Graphite Tailings As a Substitute for Filler in Asphalt Mastics

Preparation and Properties of Cold-Mixed Epoxy-Asphalt Mixture Based on Fractal Theory

Thermal, Damping, and Mechanical Properties of Thermosetting Epoxy-Modified Asphalts

Material Design and Performance Improvement of Conductive Asphalt Concrete Incorporating Carbon Fiber and Iron Tailings

Integrated Design of Structure and Material of Epoxy Asphalt Mixture Used in Steel Bridge Deck Pavement

Laboratory and Field Research on Using Cement and Polyester Fiber to Enhance the Performance of Emulsified Asphalt Cold Recycled Mixture

Investigation on the Preparation and Performances of Epoxy-Modified Asphalt Binder and Its Mixtures