Abstract:Electrical-thermal technique is a promising method for asphalt pavement snow melting with minimal external intervention. To employ this technology in practical engineering applications, plenty researches have focused on the electrical-thermal system configuration and design. In this study, an effective method to improve the efficiency of melting by combination of thermal conductive asphalt concrete (TCAC) and electrical-thermal system was proposed. The TCAC is designed with steel slag as the thermal conductive filler and used in the upper layer of the pavement to improve the heat transfer efficiency of the electrical-thermal system. The thermal conductivity (λ), road performance and electrical-thermal snow melting performance were studied in the laboratory. It is demonstrated that the mean λ of TCAC reaches a peak value when the steel slag (3–5 mm) volume content is 60 %, and it increased by 8.23%. The road performance parameters of TCAC, such as dynamic stability, flexural tensile strength, water stability and expansion ratio, can all meet the specification requirements. The snow melting effect of TCAC is better than that of ordinary asphalt concrete (OAC), and the heating rate and the snow melting efficiency of the thermal conductivity slab are increased by 25–50 % and 25–38 %, respectively. In addition, the test road was constructed based on the laboratory results, the temperature field and surface temperature prediction in the practical engineering are further analyzed. Results show that the temperature distribution of the test road is relatively uniform and the surface temperature is 0.8–1.5 °C higher than that of the ordinary section. The surface temperature of test road can be predicted and evaluated well by the Back Propagation (BP) neural network, 87 % of error is within 1 °C, and the fitting coefficient is 0.9325.

Simulation of snow melting pavement performance using measured thermal properties of graphite-modified asphalt mixture

Quantitative Evaluation on the Energy Saving and Emission Reduction Characteristics of Warm Mix Asphalt Mixtures

Mechanical Performance Of Warm-Mixed Porous Asphalt Mixture With Steel Slag And Crumb-Rubber-Sbs Modified Bitumen For Seasonal Frozen Regions

Laboratory Evaluation On The Performance Of Porous Asphalt Mixture With Steel Slag For Seasonal Frozen Regions

A Comparison of Two-Dimensional and Three-Dimensional Micromechanical Discrete Element Modeling of the Splitting Tests for Asphalt Mixtures

Micromechanical Analysis of Asphalt-Mixture Shear Strength Using the Three-Dimensional Discrete Element Method

Antifreezing and Snow Melting of MFL Modified Asphalt Concrete

Physical Properties of Graphene-Oxide Modified Asphalt and Performance Analysis of Its Mixtures Using Response Surface Methodology

Research on Self-melting Snow Material of Asphalt Pavement

Effect of Steel Wool and Graphite on the Electrical Conductivity and Pavement Properties of Asphalt Mixture

Low-Temperature Performance of Asphalt Mixtures Modified by Microencapsulated Phase Change Materials with Various Graphene Contents

Improving Effects of Pretreated Graphene on Pavement Performance and Self-Healing Behaviors of Asphalt Mixture

Analytic investigations of snow melting efficiency and temperature field of thermal conductive asphalt concrete combined with electrical-thermal system

Performance analysis of graphene modified asphalt and pavement performance of SMA mixture.

Study on thermal properties of steel slag asphalt concrete for snow-melting pavement

Study on the Long-Term Salt Release Characteristics of Self-Melting Ice Asphalt Mixtures and Their Impact on Pavement Performance

Phase-Change/Salt-Based Slow-Release Composite Material for Anti-Icing and Snow-Melting

Investigation of Long-Term Performance and Deicing Longevity Prediction of Self-Ice-Melting Asphalt Pavement

Evaluation of Performance Deterioration Characteristics of Asphalt Mixture in Corrosion Environment Formed by Snow-Melting Agents

The Effect of Adding Steel Fibers and Graphite on Mechanical and Electrical Behaviors of Asphalt Concrete

Pavement Performance and Ice-Melting Characteristics of Asphalt Mixtures Incorporating Slow-Release Deicing Agent