Abstract:In seasonal frozen soil areas, the repeated freeze–thaw cycle of internal moisture in asphalt mixture in winter and spring will accelerate the peeling of asphalt film and aggravate the water damage of asphalt pavement. It is of great significance to carry out the attenuation law of mechanical properties of asphalt mixture under freeze–thaw cycles to prevent and reduce the economic losses caused by water damage to asphalt pavement. This study will investigate the impact of deicer application on the water stability of asphalt mixtures within the climatic conditions prevalent in Northwest China. Specifically, freeze–thaw cycle tests were administered to two types of dense-graded asphalt mixtures under three distinct deicer solutions and three disparate low-temperature environments. The Marshall water immersion test and freeze–thaw splitting test were employed to evaluate the water stability of asphalt mixtures subject to multiple factors, and the relative importance of each factor was statistically analyzed using the acquired data. Results demonstrated that AC-13 and AC-16 asphalt mixtures (AC is asphalt-concrete, which is asphalt concrete, and 13 or 16 represents the maximum particle size of aggregate (13 mm or 16 mm)), saturated in 15% CH4N2O, 20% NaCl, and 20% CH2CH3OH solutions, underwent a varying number of freezing–thawing cycles (0, 5, 10, 15, 20, 25, and 30) at temperatures of −5 °C, −15 °C, and −25 °C, respectively, displayed a discernible decline in their residual stability MS0 and freeze–thaw splitting tensile strength ratio TSR. This decline was particularly marked when temperatures dropped below the solution's freezing point. Disregarding the fixed factors of weather variation (different low-temperature environments) and road service duration (number of freezing–thawing cycles), the aggregate grading imposed a more pronounced influence on asphalt mixture water stability than the presence of deicers.

Antifreezing and Snow Melting of MFL Modified Asphalt Concrete

Mechanical Performance Of Warm-Mixed Porous Asphalt Mixture With Steel Slag And Crumb-Rubber-Sbs Modified Bitumen For Seasonal Frozen Regions

Laboratory Evaluation On The Performance Of Porous Asphalt Mixture With Steel Slag For Seasonal Frozen Regions

Experimental Study on the Performance Decay of Permeable Asphalt Mixture in Seasonally Frozen Regions under Freeze-Thaw Cycles

Quantitative Evaluation on the Energy Saving and Emission Reduction Characteristics of Warm Mix Asphalt Mixtures

Simulation of snow melting pavement performance using measured thermal properties of graphite-modified asphalt mixture

Investigation of Long-Term Performance and Deicing Longevity Prediction of Self-Ice-Melting Asphalt Pavement

Research on Self-melting Snow Material of Asphalt Pavement

Anti-freezing asphalt concrete: ice-adhesion performance

Evaluation of Performance Deterioration Characteristics of Asphalt Mixture in Corrosion Environment Formed by Snow-Melting Agents

Study on the Long-Term Salt Release Characteristics of Self-Melting Ice Asphalt Mixtures and Their Impact on Pavement Performance

Study on Deicing Mechanism of High-elastic/salt-storage Functional Pavement

Study of the active anti-icing properties of modified biological antifreeze protein micro-surfacing

Pavement Performance and Ice-Melting Characteristics of Asphalt Mixtures Incorporating Slow-Release Deicing Agent

Influence of Deicer on Water Stability of Asphalt Mixture under Freeze–Thaw Cycle

Study on Performance Deterioration of Asphalt and Asphalt Mixtures Containing Mafilon under Internal Salt Freeze-Thaw Cycles

Phase-Change/Salt-Based Slow-Release Composite Material for Anti-Icing and Snow-Melting

Deicing performance of cement pavement concrete mixed with chlorine salt antifreeze material

Research of Method for Improving Antifreeze-Thaw Performance Based on Asphalt Mixture Freeze-Thaw Damage Development Process

Laboratory measurement of the adhesion strength between asphalt concrete and ice layer

Preparation and Performance Evaluation of Deicing Permeable Asphalt Mixture