Abstract:Although some efforts have been dedicated to explore aluminum oxide (AlOx) based memory devices in the past few years, the disappointed stability and complicated fabrication process strictly limit its wide applications. In this study, we introduce the annealing treatment as an effective method to substantially improve the non-volatile resistive switching performance of AlOx film based resistive memory devices. Fabricated by radio frequency magnetron sputtering method at room temperature, the AlOx resistive memory devices are subsequently annealed in nitrogen atmosphere with the temperature range from 100 degrees C to 500 degrees C. The devices exhibit enhanced bipolar resistive switching properties with forming-free nature, high HRS/LRS ratio (>10(3)), long retention time (>10(4)s) and statistical switching performance (>200 cycles). The conductive filaments constructed by oxygen vacancies has been demonstrated as a dominant factor for the resistive switching behavior in the AlOx film based memory devices, and introducing oxygen-free atmosphere annealing treatment will increase the proportion of oxygen vacancies, thus resulting in a considerable resistive switching improvement. Our work proves the great potential of annealed AlOx film as resistive switching layer in resistive random access memory devices, and also paves the way for optimization of relevant devices based on binary metal oxides.

Resistive switching characteristics of MnOx-based ReRAM

Resistive switching characteristics of MnO<sub><i>x</i></sub>-based ReRAM

Resistive switching in Nb-doped SrZrO3 memory films: An effective approach with a Cu modulation layer

Reversible Transition of Volatile to Non-Volatile Resistive Switching in Cu/SiNx/ZnO/Pt Memristor

Influence of Metal Electrode on the Performance of ZnO Based Resistance Switching Memories

Multilevel Resistive Switching With Ionic And Metallic Filaments

Investigation of resistive switching behaviours in WO3-based RRAM devices

Resistance switching in amorphous and crystalline binary oxides grown by electron beam evaporation and atomic layer deposition

Impact of interfacial engineering on MgO-based resistive switching devices for low-power applications

Resistive Switching Phenomena of HfO2 Films Grown by MOCVD for Resistive Switching Memory Devices

The Unveiling Switching Mechanism of Oxide Electrolyte Based ReRAM

Nonvolatile and volatile resistive switching characteristics in MoS 2 thin film for RRAM application

Novel hypostasis of old materials in oxide electronics: metal oxides for resistive random access memory applications

Resistive Switching Characteristics of Epitaxial La0.67Sr0.33MnO3 Films for Nonvolatile Memory Applications

Resistive Switching of SiOX with One Diode-One Resistor Nanopillar Architecture Fabricated Via Nanosphere Lithography

Oxide-based RRAM Switching Mechanism: A New Ion-Transport-recombination Model

Investigation of Forming Free Bipolar Resistive Switching Characteristics in Al/Mn3O4/FTO RRAM Device

Bipolar Resistance Switching Characteristics in Tin/Zno:Mn/Pt Junctions Developed for Nonvolatile Resistive Memory Application

Improvement of Resistive Switching Properties in $ \Hbox{zro}_{2}$-Based ReRAM with Implanted Ti Ions

Annealed AlOx Film with Enhanced Performance for Bipolar Resistive Switching Memory

Resistive Switching Behaviors And Mechanism Of Transition Metal Oxides-Based Memory Devices