Abstract:To accurately describe mechanical characteristics in the modeling and analysis of bolted joint structure in complex mechanical system, this article investigates on the equivalent parameters of mechanical characteristics (tension and compression stiffness, bending stiffness, shear stiffness, and torsion stiffness) of bolted joints by theoretical derivation and provides an effective modeling approach with thin-layer element theory and equivalent parameters as well. First, the equivalent parameters of mechanical characteristics of bolted joints are achieved. And then the finite element model of bolted joint is established by equivalent parameters, called as parametric modeling method. Based on two cases of study, the mode analyses of parametric finite element models are implemented with dynamic test data to validate the developed parametric finite element models of bolted joints with the equivalent parameters. It is shown from the investigations that parametric finite element models have higher precision than finite element model in structural dynamic analysis because the analytical results based on parametric finite element models are closer to test data. It is fully demonstrated that the equivalent parameters may effectively simulate the mechanical characteristics of bolted joint structures, and the parametric modeling approach with equivalent parameters is efficient and high fidelity for bolted joints in complex machinery due to high precision in mode analysis. The efforts provide an effective modeling method for simulating the mechanical characteristics of bolted joints and designing bolted joint structure in complex machinery.

Models of Equivalent Force and Equivalent Mass about Planar Linkage

A calculation method of equivalent moment of inertia for one- DOF planar linkage

Kinematics and Inverse Dynamic Analysis of a 6 Channel Half-axle Test Rig

A Generalization of Kempe’s Linkages

FINITE ELEMENT APPROACH TO DYNAMICAL MODELING OF ROBOT MECHANISM

Forming Dynamic Equations of Elastic Linkage and Investigation of Model Error

Solving velocity ratio of different mechanisms for equivalent models

Kinematic and Dynamic Models of Hyper-Redundant Manipulator Based on Link Eigenvectors

Equivalence and Dynamic Analysis for Jointed Trusses Based on Improved Finite Elements

A General Discretization-Based Approach for the Kinetostatic Analysis of Closed-Loop Rigid/Flexible Hybrid Mechanisms.

Dynamic Model and Dynamic Characteristics of a 3-DOF Spindle with a Parallel Linkage Mechanism

Four-Bar Linkages with Monolithic Flexure Hinge Joints and their Dynamic Models

Static Force-Based Modeling and Parameter Estimation for a Deformable Link Composed of Passive Spherical Joints with Preload Forces.

Vibration Analysis of Periodic Trusses with Rigid Joints Using an Energy Equivalent Method

Equivalent Simulation of Mechanical Characteristics for Parametric Modeling of Bolted Joint Structures

A Modular Modeling Approach for Planar Linkage Mechanisms Considering Clearance Effects

Finite Element Kinematics Modeling of Planar Parallel Manipulators with Monolithic Flexure Joints

A Design Approach for Flexible-Link Parallel Mechanisms Using Kinematic Equivalence Between Rigid and Elastic Chains

A Novel Mechanical Model Based on the Dynamic Stiffness Matrix for Unified Dynamic and Static Modeling of Planar Compliant Mechanisms

Dynamic performance of over-constrained planar mechanisms with multiple revolute clearance joints

Analytical Compliance Modeling of Serial Flexure-Based Compliant Mechanism under Arbitrary Applied Load