Abstract:This paper investigates the forward and inverse kinematics in screw coordinates for a planar slider-crank linkage. According to the definition of a screw, both the angular velocity of a rigid body and the linear velocity of a point on it are expressed in screw components. Through numerical integration on the velocity solution, we get the displacement. Through numerical differential interpolation of velocity, we gain the acceleration of any joint. Traditionally, position and angular parameters are usually the only variables for establishing the displacement equations of a mechanism. For a series mechanism, the forward kinematics can be expressed explicitly in the variable of position parameters while the inverse kinematics will have to resort to numerical algorithms because of the multiplicity of solution. For a parallel mechanism, the inverse kinematics can be expressed explicitly in the variable of position parameters of the end effector while the forward kinematics will have to resort to numerical algorithms because of the nonlinearity of system. Therefore this will surely lead to second order numerical differential interpolation for the calculation of accelerations. The most prominent merit of this kinematic algorithm is that we only need the first order numerical differential interpolation for computing the acceleration. To calculate the displacement, we also only need the first order numerical integral of the velocity. This benefit stems from the screw the coordinates of which are velocity components. The example of planar four-bar and five-bar slider-crank linkages validate this algorithm. It is especially suited to developing numerical algorithms for forward and inverse velocity, displacement and acceleration of a linkage.

A calculation method of equivalent moment of inertia for one- DOF planar linkage

Models of Equivalent Force and Equivalent Mass about Planar Linkage

Kinematic and Dynamic Models of Hyper-Redundant Manipulator Based on Link Eigenvectors

FINITE ELEMENT APPROACH TO DYNAMICAL MODELING OF ROBOT MECHANISM

A New Method to the Dynamic Analysis of Flexible Linkage Mechanism

A General Discretization-Based Approach for the Kinetostatic Analysis of Closed-Loop Rigid/Flexible Hybrid Mechanisms.

A Novel Iterative Method of Determining the Pose Error of Planar Clearance-Affected Flexible Parallel Mechanisms Under Loaded Mode

Dynamic Manipulability and Optimization of a Redundant Three DOF Planar Parallel Manipulator

Improved discrete null space method for dynamics analysis constrained multiboby systems

Dynamic Formulation and Inertia Fast Estimation of a 5-DOF Hybrid Robot.

Dynamic performance of over-constrained planar mechanisms with multiple revolute clearance joints

Forming Dynamic Equations of Elastic Linkage and Investigation of Model Error

Dynamic Formulation and Simplified Model of a Novel 3-DOF Parallel Mechanism with Actuation Redundancy

Identification of Planar Double-wishbone Suspension Mechanism Using Jacobian Approach

Kinematics of a Planar Slider-Crank Linkage in Screw Form

Dynamic Manipulability and Optimization of A Two Dof Parallel Mechanism

Study on Modeling and Dynamic Performance of a Planar Flexible Parallel Manipulator Based on Finite Element Method

A Moment Estimation–based Method for the Path Planning of Manipulators with Kinematic System Reliability Constraints

The Dynamic Modeling, Redundant-Force Optimization, and Dynamic Performance Analyses of A Parallel Kinematic Machine with Actuation Redundancy

General inverse dynamic analysis of Gough-Stewart platform

Kinematic modeling and optimal design of a partially compliant four-bar linkage using elliptic integral solution