Abstract:The local heat transfers of a thermally developing region in a rectangular channel filled with porous metal foam are investigated experimentally. A thin metal foil technique and thermal IR imaging are adopted for the measurement of the local temperature distribution. An open-cell metal foam made from copper having a porosity of 0.96 is used. The pore density of the foam is 30 PPI (pores per inch). Fluid flow characteristics like permeability and foam drag coefficient are measured by conducting local pressure drop experiments. Additionally, by utilizing local pressure measurement data, the non-dimensional pressure coefficient is quantified. The non-dimensional pressure coefficient increases in the streamwise direction, irrespective of the Reynolds number, and remains almost constant in the spanwise direction for Reynolds numbers greater than 2000. The effect of the metal foam thickness on local heat transfer and pressure drop is investigated for 13 and 20 mm thick porous metal foam. It is compared with a smooth channel to quantify the heat transfer augmentation in a channel filled with metal foam. Compared to a smooth channel, the channel with 20 mm thick metal foam shows 14 to 25 times augmentation in the Nusselt number. Similarly, the channel with 13 mm foam shows 10 to 15 times augmentation in Nusselt number. The increasing trend of the local Nusselt number is observed in a streamwise direction. The different criteria are studied to understand the thermal performance evaluation. In the Constant Pumping Power Criterion (CPPC), enhancements ranged from 3.14 to 6.72 for a 20 mm thickness and 2.62 and 4.34 for a 13 mm foam thickness. Similarly, in the Performance Evaluation Criterion (PEC), enhancement ranges from 2.23 to 4.83 for a 20 mm foam thickness and 1.89 to 3.16 for a 13 mm foam thickness. A generalized correlation is suggested to describe the average Nusselt number considering the foam material, foam thickness, pore density, and porosity as parameters.

Experimental Study of Natural Convective Heat Transfer in Horizontally-Positioned Cellular Metal Foams with Open Cells

Pore-scale Simulation of Forced Convection Heat Transfer under Turbulent Conditions in Open-Cell Metal Foam

Air-side Performance of Open-Cell Metal Foams for Use in Dehumidifying Heat Exchangers

Unlocking the Thermal Efficiency of Irregular Open-Cell Metal Foams: A Computational Exploration of Flow Dynamics and Heat Transfer Phenomena

Experimental investigation of permeability and Darcy-Forchheimer flow transition in metal foam with high pore density

Transient Performance of a PCM-based Heat Sink with a Partially Filled Metal Foam: Effects of the Filling Height Ratio

Effects of structure characteristics and fluid on the effective thermal conductivity of sintered copper foam

Effect of Metal Foam on Natural Convective Heat Transfer of Nanofluids in a Photothermal Conversion System

Numerical Study on Fluid Flow Behavior and Heat Transfer Performance of Porous Media Manufactured by a Space Holder Method

Pore-scale Simulation of Forced Convection Heat Transfer in Metal Foams with Uniform and Gradient Structures

Heat Transfer Analysis for Open Cell Metallic Foams

Forced Convection Heat Transfer: A Comparison Between Open-Cell Metal Foams and Additive Manufactured Kelvin Cells

Modeling and Prediction of the Effective Thermal Conductivity of Random Open-Cell Porous Foams

Experimental Study on the Thermal Performance of a Finned Metal Foam Heat Sink with Phase Change Material

Local heat transfer distribution of thermally developing region in a rectangular open-cell metal foamed channel

On the Efficiency of Air-Cooled Metal Foam Heat Exchangers

Experimental investigation on the influence of copper foam characteristics on pool boiling heat transfer

Study on the thermal conductivity of foam materials prepared from hollow microspheres

Experimental investigation on confined jet impingement boiling heat transfer characteristics on metal foam cover

Heat Dissipation of Open-Cell-Type Aluminum Foams Manufactured by Replication-Casting Process

Enhanced heat transfer performance of optimized micro-channel heat sink via forced convection in cooling metal foam attached on copper plate