Abstract:A servo controlled gradient loading model test system is developed to simulate the gradient geostress in deep-buried cavern. This system consists of the gradient loading apparatus, the digital servo control device, and the measurement system. Among them, the gradient loading apparatus is the main component which is used for exerting load onto the model. This loading apparatus is placed inside the counterforce wall/beam and is divided to several different loading zones, with each loading zone independently controlled. This design enables the gradient loading. Hence, the "real" geostress field surrounding the deep-buried cavern can be simulated. The loading or unloading process can be controlled by the human-computer interaction machines, i.e., the digital servo control system. It realizes the automation and visualization of model loading/unloading. In addition, this digital servo could control and regulate hydraulic loading instantaneously, which stabilizes the geostress onto the model over a long term. During the loading procedure, the collision between two adjacent loading platens is also eliminated by developing a guide frame. This collision phenomenon is induced by the volume shrinkage of the model when compressed in true 3D state. In addition, several accurate measurements, including the optical and grating-based method, are adopted to monitor the small deformation of the model. Hence, the distortion of the model could be accurately measured. In order to validate the performance of this innovative model test system, a 3D geomechanical test was conducted on a simulated deep-buried underground reservoir. The result shows that the radial convergence increases rapidly with the release of the stress in the reservoir. Moreover, the deformation increases with the increase of the gas production rate. This observation is consistence with field observation in petroleum engineering. The system is therefore capable of testing deep-buried engineering structures.

RESEARCH PROGRESS OF GEOMECHANICAL MODEL TEST WITH NEW TECHNOLOGY AND ITS ENGINEERING APPLICATION

Techniques of Geomechanical Model Test and Engineering Application

A new mini-grating absolute displacement measuring system for static and dynamic geomechanical model tests

Enhancement of Constant Normal Stiffness Direct Shear Testing Protocols for Determining Geomechanical Properties of Fractures

Design of a Displacement Monitoring System Based on Optical Grating and Numerical Verification in Geomechanical Model Test of Water Leakage of Tunnel

DEVELOPMENT OF LARGE-SCALE GEOMECHANICAL MODEL TEST SYSTEM FOR TUNNEL CONSTRUCTION AND ITS APPLICATION

DEVELOPMENT AND APPLICATION OF NEW TECHNOLOGY FOR 3D GEO-MECHANICS MODEL TEST OF LARGE UNDERGROUND HOUSES

Research on Application of Optical Sensor-Based Measuring Method to Model Test

Development and Application of High-Geostress True 3D Loading Geomechanics Model Test System

STUDY AND APPLICATION OF INVERSE CONTROLLING TECHNOLOGY FOR 3D GEOMECHANICAL MODEL CONSTRUCTION OF UNDERGROUND ENGINEERING

Application and Consideration of Using Fiber- Sensor Measurement in a 3D Geo-Mechanical Model Test

Development and Application of a Three-Dimensional Geo-Mechanical Model Test System Under Hydro-Mechanical Coupling

Model test of mine tunnel in stress concentration areas with digital photography-based deformation measurement technique

Study on the Measurement Methods for Model Test of Double-Arch Tunnel

MODEL TEST AND 3D NUMERICAL SIMULATION STUDY ON EXCAVATION OF DOUBLE-ARCH TUNNEL

Study on Fractured Rock-Like Materials for Geomechanical Model Test Based on 3D Printing Technology

A Servo Controlled Gradient Loading Triaxial Model Test System for Deep-Buried Cavern.

Development and Application of Micro Automatic Excavation Device for Model Test of Underground Engineering

Development of Digital Controlling Air Pressure Flexible Loading Model Test System and Its Application

Study on Deformation Measurement in Surrounding Rock Failure Model Test of Deep Roadway

A Geomechanical Model Test on the Construction Stability and Overload Failure Process of an X-Type Cross Cavern Group