Abstract:We proposed a novel kind of absolute capacitive grating displacement measuring system with both high accuracy and long range in a previous article. The measuring system includes both a MOVER and a STATOR, the contact surfaces of which are coated by a thin layer of dielectric film with a low friction coefficient and high hardness. The measuring system works in contact mode to minimize the gap changes. This paper presents a theoretical analysis of the influence of some factors, including fabrication errors, installation errors, and environment disturbance, on measurement signals. The measuring signal model was modified according to the analysis. The signal processing methods were investigated to improve the signal sensitivity and signal-to-noise ratio (SNR). The displacement calculation model shows that the design of orthogonal signals can solve the dead-zone problem. Absolute displacement was obtained by a simple method using two coarse signals and highly accurate displacement was further obtained while using two fine signals with the help of absolute information. According to the displacement calculation model and error analysis, the error in fine calculation functions mainly determines the model's accuracy and is locally affected by coarse calculation functions. It was also determined that amplitude differences, non-orthogonality, and signal offsets are not related to the accuracy of the displacement calculation model. The experiments were carried out to confirm the abovementioned theoretical analysis. The experimental results show that the displacement resolution and error in the displacement calculation model reach ±4.8 nm and ±34 nm, respectively, in the displacement range of 5 mm. The experiments and the theoretical analyses both indicate that our proposed measuring system has great potential for achieving an accuracy of tens of nanometers and a range of hundreds of millimeters.

A new mini-grating absolute displacement measuring system for static and dynamic geomechanical model tests

A New Laser Displacement Sensor Based on Triangulation for Gauge Real-Time Measurement

A High-precision Displacement Measuring System in SPC

Fiber Bragg grating test system and model tests based on geotechnical centrifuge

Research on the Displacement Transfer Pattern and Error Analysis for Mini-type Multi-point Extensometer

Vision-based Structural Displacement Measurement: System Performance Evaluation and Influence Factor Analysis

Fiber Optic Displacement Monitoring in Laboratory Physical Model Testing

A Vision-Based System for Dynamic Displacement Measurement of Long-Span Bridges: Algorithm and Verification

DEVELOPMENT OF LARGE-SCALE GEOMECHANICAL MODEL TEST SYSTEM FOR TUNNEL CONSTRUCTION AND ITS APPLICATION

Fiber Optic Monitoring of an Underground Excavation Model Text

Image-Based Structural Dynamic Displacement Measurement Using Different Multi-Object Tracking Algorithms

A Large-Scale Model Test System for Stability Study of Tunnel Under Static-Dynamic Load

Multi-axis Dynamic Displacement Measurement Based on a Strain Shunt Structure

DEVELOPMENT AND APPLICATION OF NEW TECHNOLOGY FOR 3D GEO-MECHANICS MODEL TEST OF LARGE UNDERGROUND HOUSES

Three-Dimensional Measuring Device and Method of Underground Displacement Based on Double Mutual Inductance Voltage Contour Method

Techniques of Geomechanical Model Test and Engineering Application

Error Analysis and Modeling for an Absolute Capacitive Displacement Measuring System with High Accuracy and Long Range.

Modern Displacement Measuring Systems Used in Geotechnical Laboratories: Advantages and Disadvantages

A Novel High Speed/High Precision Displacement Measurement Method Using Double Grating Scales for a Macro/Micro Driven System: Principle Design and Experimental Verification

Development and Application of a Three-Dimensional Geo-Mechanical Model Test System Under Hydro-Mechanical Coupling

Two-Degree-Of-Freedom Displacement Measurement System Based on Double Diffraction Gratings