Abstract:It is relatively difficult to monitor the deformation of slope body in model test. To solve this problem, the optical fiber sensing technique is applied to slope model test. By constructing physical model for slope under artificial rainfall,the deformation in slope body can be monitored by optical fiber sensing technology of Brillouin optical time domain reflectometer(BOTDR);and the deformation on slope surface can be monitored by fiber Bragg grating(FBG). Regarding the fixed point on the model box as the reference point,the variations in slope body can be monitored by the optical fiber preburied in the different locations of slope;and the deformation on slope surface can be achieved by the FBG sensor set on the slope surface. According to the recorded data of deformations before,during and after rainfalls,it can be found that the deformation of slope is not obvious in initial period of rainfall,but as the time goes on,there is a sudden growth of the deformation in the slope body and surface. The part of the slope closer to the surface has the larger deformation,but the part at the bottom of the slope has the least deformation. The overall law is that the influence of rainfall on slope body diminishes gradually with increase of depth of slope body. That can explain why the homogeneous soil-slope′s failure induced by rainfall is easy to occur in shallow strata. In the slope surface,the maximum deformation appears in the trailing edge of slope,and the minimum one appears in the front edge. After the rainfall,a part of the deformations in the slope reduces to a lower value. The experimental result has proven that the optical fiber sensing technologies of BOTDR and FBG have many advantages in the monitoring of geotechnical engineering,and they can offer practical references and prospects on application.

Research on Application of Optical Sensor-Based Measuring Method to Model Test

APPLICATION OF FBG SENSOR TO INTERNAL DISPLACEMENT MONITORING OF SURROUDING ROCK

Application Of Fiber Bragg Grating Displacement Sensors To Geotechnical Model Test Of Underground Salt Rock Gas Storages

Study And Application Of Visualized Model Test Technologies For Gas Storage Cluster In Salt Rock

Simulation Study of Fiber Optic Monitoring Technology of Surrounding Rock Deformation under Deep Mining Conditions

PHYSICAL MODEL TEST STUDY ON DEFORMATION OF OVERLYING STRATA DURING COAL MINING WITH DISTRIBUTED FIBER OPTIC DEFORMATION MONITORING

APPLICATION OF OPTICAL FIBER SENSING TECHNOLOGY TO SLOPE MODEL TEST

Application of Optical-Fiber Sensing to Concrete Support and Continuous Wall Strain Monitoring

Study on Quantitative Characterization of Coupling Effect between Mining-Induced Coal-Rock Mass and Optical Fiber Sensing

Study of sections strain of undersea immersed tube tunnel based on optical fiber grating technology

A new mini-grating absolute displacement measuring system for static and dynamic geomechanical model tests

Application and Consideration of Using Fiber- Sensor Measurement in a 3D Geo-Mechanical Model Test

A Method of Monitoring the Cross-Section Deformation of Tunnels Using the Strain Data from the Fully Distributed Optical Fibre Sensors

Fiber Optic Displacement Monitoring in Laboratory Physical Model Testing

Strain Measurement Technology and Precision Calibration Experiment Based on Flexible Sensing Fiber

MODEL TEST ON DISTRIBUTED OPTICAL FIBER MONITORING OF LAND SUBSIDENCE AND GROUND FISSURES

Research on Optical Fiber Sensor Based on Underwater Deformation Measurement

Fiber Optic Monitoring of an Underground Excavation Model Text

Application of optical fiber Bragg grating strain measuring technique in large scale shaking table model tests

PHYSICAL MODEL TESTING OF SLOPE STABILITY BASED ON DISTRIBUTED FIBER-OPTIC STRAIN SENSING TECHNOLOGY

MODEL TEST OF SOIL SLOPE STABILITY WITH DISTRIBUTED OPTICAL FIBER SENSING TECHNOLOGY