Abstract:To enable rapid development of flexible microelectronic systems, effective thermal management is needed. Flexible polydimethylsiloxane (PDMS)-based microchannel flow boiling may provide a desirable solution. However, the heat transfer performance of PDMS-based microchannels is diminished by its poor thermophysical properties. The development of PDMS wick is proposed to address this dilemma. Herein, a new PDMS wick structure is designed and integrated in the microfluidic device to significantly enhance its thermal performance by promoting capillary-driven flow. Furthermore, to achieve highly efficient vapor removal, a dedicated vapor pathway is designed in the microfluidic device. Experiments have been conducted to investigate the capillary-assisted evaporation/boiling for mass flux ranging from 70 to 245 kg/m2 s on dielectric fluid HFE-7100. The capillary-assisted sustainable and stable thin film evaporation and efficient vapor removal have been demonstrated through the visualization studies. With this new wick design, the liquid rewetting at global and local levels is facilitated through the capillary-driven flow and the efficient vapor removal. This hybrid liquid rewetting mechanism is experimentally demonstrated to significantly enhance the capillary-assisted evaporation/boiling in PDMS-based microchannel. A critical heat flux (CHF) of 14.7 W/cm2 is achieved at a mass flux of 245 kg/m2 s. The heat transfer coefficients (HTC) range from 2000 to 9800 W/m2 K. These values are comparable to that in copper/silicon microchannels, with the aforementioned benefits of flexibility. Equally importantly, stable two-phase transport is achieved as well.

Electrical Leakage Through Thin PDMS Microchannel Walls and Its Applications

Experimental Characterization of Electrical Current Leakage in Poly(dimethylsiloxane) Microfluidic Devices

Fabrication And Characterization Of Parylene C-Caulked Pdms For Low-Permeable Microfluidics

Electroosmotic flow in poly(dimethylsiloxane) microchannels.

Electrokinetic Particle Entry into Microchannels

Micro Etching Method Inside Microchannels

Preparation of thermoswitchable micro capillary force valves inside polydimethylsiloxane microfluidic channels

SIMULATION AND MICRO-PIV RESEARCH ON CLASSICAL MICROCHANNEL FLOW

Joule Heating Effects on Electroosmotic Entry Flow

Direct electrification of silicon microfluidics for electric field applications

A Simple Electrode Insulation and Channel Fabrication Technique for High-Electric Field Microfluidics

Capillary-Assisted Evaporation/Boiling in PDMS Microchannel Integrated with Wicking Microstructures

Dissipative Particle Dynamics Simulation of Flow Through Periodic Arrays of Circular Micropillar

Porous Membrane‐Enabled Fast Liquid Metal Patterning in Thin Blind‐Ended Microchannels

Observation Interface of PDMS Membrane in a Microfluidic Chip Based on One-Step Molding

Research of Dielectric Breakdown Microfluidic Sampling Chip

Evaluation of different PDMS interconnection solutions for silicon, Pyrex and COC microfluidic chips

PDMS Microfabrication and Design for Microfluidics and Sustainable Energy Application: Review

Studies on Parylene C-caulked PDMS (pcpdms) for Low Permeability Required Microfluidics Applications.

Modelling of SAW-PDMS acoustofluidics: physical fields and particle motions influenced by different descriptions of the PDMS domain.

Creating Sub-50 Nm Nanofluidic Junctions in PDMS Microfluidic Chip Via Self-Assembly Process of Colloidal Particles.