Abstract:Great progress has been carried out on the Micro Total Analysis System (μTAS) in recent years, in which the chemical analysis system is miniaturized by micromachining. This system can reduce reagent consumption, dispersion effects and analysis time. Nowadays, μTAS devices are beginning to make significant contributions to biotechnology, biomedicine and drug discovery. Meanwhile, due to the difficulties of controlling fluid motion in such a small scale, fluid flow driven in microfluidic devices has received increasing attention. So far electroosmotic flow (EOF) is one of the most popular and important fluid driven techniques in microfluidic devices because in an EOF the velocity profile is plug-like and the mean velocity is independent of the cross-sectional area, as well as its valveless control of fluid flow. Therefore, electro-osmotic flow can offer significantly less deleterious dispersive effects than pressure-driven flow and provide a favored high-performance sample separation technique. Due to its importance, electroosmotic flow in microchannels has received considerable attentions recently and been investigated both numerically and experimentally. However, fluid flow in microfluidic devices is often through channels with changes in cross-sectional area, and/or channels with bends and bifurcations, which make a great difference to velocity profile, pressure distribution and so on. A systematic study of these different configurations will provide valuable insight into the flow physics. The goal of the present study is to undertake a numerical study of EOF in microchannels with a sudden expansion in order to identify the factors affecting the flow. The present work is in the use of an incompressible lattice-Boltzmann model with a forcing term which is perhaps better suited to microflows than the conventional Navier-Stokes solvers. The impact of expansion ratio (ER), ionic molar concentration (c ∞), external electric potential and zeta potential on the flows are investigated. Numerical results including velocity profile, pressure distribution and external electrical potential distribution have been presented. It has been shown that boundary layer separation has been suppressed by the electroosmotic force exerted on the fluid near walls. Moreover, a sudden change in the channel has a great influence on the electroosmotic flows. A jump has been found in fluid velocity, pressure drop at the junction, as well as electrical potential due to EDL. The external electrical potential is linear along the axis of the channel but a turning point emerges at the junction. Non-linear pressure drop in the narrow channel becomes more obvious as ER increases. Results also show that velocity profile at the outlet depends on ER and c ∞. The convex velocity profile turns to concave one as ER or c ∞ increases, resulted from interactions between adverse pressure gradient and electric force exerted on the fluid in the middle of channel.

Joule Heating Effects on Electroosmotic Entry Flow

Joule Heating And Its Effects On Electroosmotic Flow In Microfluidic Channels

Joule Heating Effects on Electrokinetic Focusing and Trapping of Particles in Constriction Microchannels

Joule Heating Induced Thermal and Hydrodynamic Development in Microfluidic Electroosmotic Flow

Numerical analysis of the thermal effect on electroosmotic flow and electrokinetic mass transport in microchannels

Joule heating effects on two-phase flows in dielectrophoresis microchips

Joule Heating Effect on Electroosmotic Flow and Mass Species Transport in a Microcapillary

Modeling of Electroosmotic Flow and Capillary Electrophoresis with the Joule Heating Effect: the Nernst−Planck Equation Versus the Boltzmann Distribution

Joule Heating Induced Heat Transfer for Electroosmotic Flow of Power-Law Fluids in a Microcapillary

Joule Heating Effects on Separation Efficiency in Capillary Zone Electrophoresis with an Initial Voltage Ramp.

Induced charge effects on electrokinetic entry flow

On Electrokinetic Mass Transport in a Microchannel With Joule Heating Effects

Analysis of Joule heating and viscous dissipation on electromagnetohydrodynamic flow with electroosmotic effect in a porous microchannel: A heat transfer miniature enhancement

Electrokinetic Particle Entry into Microchannels

Joule Heating in Polymer Microfluidic Chip

Applications of Electrohydrodynamics and Joule Heating Effects in Microfluidic Chips: A Review

Effect of Joule Heat on Hydrophily of Microchannel

A Microscopic Physical Description Of Electrothermal-Induced Flow For Control Of Ion Current Transport In Microfluidics Interfacing Nanofluidics

Joule Heating Effects on Transport-Induced-Charge Phenomena in an Ultrathin Nanopore

LATTICE BOLTZMANN SIMULATION OF ELECTROOSMOTIC FLOWS IN MICROCHANNEL WITH A SUDDEN EXPANSION

Steady Electroosmotic Flow in Diverging Microchannels