Abstract:Al-Mg-Si series aluminum alloy is a heat-treatment-strengthened alloy. Research on the impact resistance of Al-Mg-Si series aluminum alloy is of great significance to expand its application in engineering. Taking 6082-T6 aluminum alloy as the concrete research object, using the split Hopkinson pressure bar (SHPB) device, the dynamic mechanical response of the material under different temperatures and average strain rates was studied, and the service performance of the material under extreme conditions was determined. The absolute temperature rise was introduced to optimize the existing constitutive model. The results show that when the environment temperature is 298.15~473.15 K under high-speed impact, the internal thermal softening effect of the material is dominant in the competition with the work hardening, resulting in a decrease in the flow stress of the material. Through the analysis of the real stress–strain curve, it was found that the elastic modulus of the material was negatively correlated with the strain rate, negatively correlated with the temperature, and showed an obvious temperature-softening effect. Yield strength was negatively correlated with temperature and positively correlated with strain rate, which showed an obvious strain rate hardening effect. Based on SEM microscopic analysis, it was found that under given conditions, adiabatic shear bands appeared in some samples, and their internal structures demonstrated obvious change. It was judged that when high-speed impact occurs, cracks are induced at the shear bands, and the cracks will continue to develop along the adiabatic shear bands, resulting in many oblique cracks which will gradually become larger and eventually lead to material failure. Finally, based on the model, the strain rate and temperature softening terms were improved, and a rise in adiabatic temperature rise was introduced. The improved model can better describe the strain rate effect of the material and accurately describe its flow stress. It provides a theoretical basis for the engineering application of materials.

Research on mechanical properties and their temperature dependencies of LC9 alloys under dynamic load

Study on Correlation Between Parameters of "single Factor" Constitutive Model and Temperature for 7050 Aviation Aluminum-Alloy

Mechanical properties and JC constitutive modification of tungsten alloys under high strain rates and high/low temperatures

Effect of Strain Rate and Temperature on Dynamic Mechanical Behavior and Microstructure Evolution of Ultra-High Strength Aluminum Alloy

Dynamic Mechanical Behavior at Elevated Temperatures and High Strain Rates of Low Yield Point Steels

Experimental Study on Tensile Properties of CP-Ti Athigh Strain Rate and Different Temperatures

Dynamic Plastic Experiments and Constitutive Model of 2024 Aluminum under High Temperature and High Strain Rate

A modified Johnson-Cook model considering strain softening of A356 alloy

Constitutive modeling and microstructure characterization of 2196 Al-Li alloy in various hot deformation conditions

Study of dynamic mechanical behavior of 1060-H112 aluminum alloy: Experimental and numerical simulation

Research and Revise on Constitutive Equation of 7050-T7451 Aluminum Alloy in High Strain Rate and High Temperature Condition

Dynamic Mechanical Properties and Modified Material Constitutive Model for Hot Forged Ti2AlNb over Wide Ranges of Temperature and Strain Rate

Dynamic Mechanical Properties and Modification of Fracture Criteria of 6061-T651 Aluminum Alloy

Dynamic mechanical response and a constitutive model of Fe-based high temperature alloy at high temperatures and strain rates

Study on Mechanical Properties and Constitutive Model of 5052 Aluminium Alloy

The Study on Forming Property at High Temperature and Processing Map of 2219 Aluminum Alloy

Study on dynamic mechanical properties and constitutive model of 10B/Al composite compared with its matrix of high-purity aluminum

Study on constitutive relationship of 6061 aluminum alloy based on Johnson-Cook model

Modification of the Johnson-Cook relationship for AZ31 magnesium alloy at high strain rates

Dynamic Behavior of Aluminum Alloy Aw 5005 Undergoing Interfacial Friction and Specimen Configuration in Split Hopkinson Pressure Bar System at High Strain Rates and Temperatures

Study on Dynamic Impact Response and Optimal Constitutive Model of Al-Mg-Si Aluminum Alloy