Abstract:Al-Mg-Si series aluminum alloy is a heat-treatment-strengthened alloy. Research on the impact resistance of Al-Mg-Si series aluminum alloy is of great significance to expand its application in engineering. Taking 6082-T6 aluminum alloy as the concrete research object, using the split Hopkinson pressure bar (SHPB) device, the dynamic mechanical response of the material under different temperatures and average strain rates was studied, and the service performance of the material under extreme conditions was determined. The absolute temperature rise was introduced to optimize the existing constitutive model. The results show that when the environment temperature is 298.15~473.15 K under high-speed impact, the internal thermal softening effect of the material is dominant in the competition with the work hardening, resulting in a decrease in the flow stress of the material. Through the analysis of the real stress–strain curve, it was found that the elastic modulus of the material was negatively correlated with the strain rate, negatively correlated with the temperature, and showed an obvious temperature-softening effect. Yield strength was negatively correlated with temperature and positively correlated with strain rate, which showed an obvious strain rate hardening effect. Based on SEM microscopic analysis, it was found that under given conditions, adiabatic shear bands appeared in some samples, and their internal structures demonstrated obvious change. It was judged that when high-speed impact occurs, cracks are induced at the shear bands, and the cracks will continue to develop along the adiabatic shear bands, resulting in many oblique cracks which will gradually become larger and eventually lead to material failure. Finally, based on the model, the strain rate and temperature softening terms were improved, and a rise in adiabatic temperature rise was introduced. The improved model can better describe the strain rate effect of the material and accurately describe its flow stress. It provides a theoretical basis for the engineering application of materials.

Study on dynamic mechanical properties and constitutive model of 10B/Al composite compared with its matrix of high-purity aluminum

Mechanical Properties and Constitutive Model of Aluminum Powder/rubber Matrix Composites Compressed at Various Strain Rates

Dynamic mechanical behavior and constitutive model of 3004 aluminum

Dynamic deformation behavior of a high reinforcement content TiB2/Al composite at high strain rates

Thermo⁻Mechanical Behavior and Constitutive Modeling of In Situ TiB2/7050 Al Metal Matrix Composites Over Wide Temperature and Strain Rate Ranges

Compressive behavior of high particle content B4C/Al composite at elevated temperature

Dynamic Mechanical Behavior of 6061 Al Alloy at Elevated Temperatures and Different Strain Rates

Al/Al2O3 composite mechanical behaviour of compression in pseudo-semi-solid sate

Dynamic Mechanical Properties of Ti–Al3Ti–Al Laminated Composites: Experimental and Numerical Investigation

Dynamic Mechanical Behavior and Numerical Simulation of 6013-T4 Aluminum Alloy at Different Temperatures and Strain Rates

Study on Dynamic Impact Response and Optimal Constitutive Model of Al-Mg-Si Aluminum Alloy

Dynamic compressive properties of 40 vol%SiC_P/2024Al composite

Hot Deformation Behavior and Microstructure Evolution of Flaky Ti3AlC2 Particles Reinforced Pure Al Composite

Compressive response and microstructural evolution of in-situ TiB2 particle-reinforced 7075 aluminum matrix composite

A Modified Johnson-Cook Model with Damage Degradation for B4Cp/Al Composites

Research on Dynamic Mechanical Properties and Plastic Constitutive Relation of Ti3Al Intermetallic Compounds under Mechanical-Thermal Coupling

Dynamic Plastic Experiments and Constitutive Model of 2024 Aluminum under High Temperature and High Strain Rate

Adiabatic shear failure of high reinforcement content aluminum matrix composites

The Hyperbolic Constitutive Equations and Modified Dynamic Material Model of TiBw/Ti-6.5Al-2.5Zr-1Mo-1V-0.5Si Composites

Equicohesive Temperature of the Interface and Matrix and Its Effect on the Tensile Plasticity of Al18b4o33 Whiskers Reinforced Aluminum Composite at Elevated Temperatures

Mechanical Property of M40J F /5a06al Composite at Elevated Temperatures