Abstract:The centrifugal impeller with arbitrary surface blades is a very important component in automobile, ships, and aircraft industry, and it is one of the most difficult parts to process. Focusing on the machining efficiency improvement, combining the geometric advantages of ruled surface and arbitrary surface, and utilizing the efficient and accurate advantages of flank machining and point machining, this article presents a novel and targeted tool-path generation method and algorithm for five-axis flank machining of centrifugal impeller with arbitrary surface blades. In light of specific characters of different surfaces, the analyses of two different impeller blades are proposed first, the more characteristic and complex geometrical structures of the arbitrary blade are achieved. In rough machining, an approximate ruled surface blade is obtained, and a simple channel is achieved; the flank milling of the centrifugal impeller with ruled surface blades is achieved relative to the point milling of the centrifugal impeller with arbitrary surface blades; and the triangle tool path planning method is added in this process to save the machining time and cost collectively. Furthermore, in semi-finish machining, the approximate sub-ruled blade surfaces are calculated, and a new flank milling method of the sub-ruled blade surfaces is achieved; a new solution for tool interference is achieved in this process and the generation of noninterference tool paths becomes easy. Machining experiments of two different impellers are presented as a test of the proposed methods.

Research on Side Mill Way Planning Algorithm of Centrifugal Impeller Blade Ruled Surface

A novel tool-path generation method for five-axis flank machining of centrifugal impeller with arbitrary surface blades

An efficient five-axis machining method of centrifugal impeller based on regional milling

A novel tool path generation algorithm for plane envelope grinding convex surface based on constant scallop height method

Tool path planning for five-axis flank milling of free-form surfaces

Path Planning for Support Heads in Mirror-Milling Machining System

Iso-Parametric Tool Path Planning for Five-Axis Compound Surface Machining

Key Technologies Research For Impellers Machining Based On Nx

Judging of Machining Feasibility and Calculation of Midsection for the Five-Axis Milling of Shrouded Centrifugal Impeller

Investigation of tool orientation for milling blade of impeller in five-axis machining

Tool-path planning based on iso-scallop for plunge milling in pocket walls manufacture

A generic uniform scallop tool path generation method for five-axis machining of freeform surface.

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

An accurate surface error optimization for five-axis machining of freeform surfaces

Tool-path planning method for kinematics optimization of blade machining on five-axis machine tool

A feedback toolpath generation method for compound trimmed surface with machine’s dynamic characteristics confined

Research Progress in Tool Path Planning for Five-axis End Milling Machining of Sculptured Surfaces

Simulation Efficiency Optimization Method of Flank Milling for Nondevelopable Ruled Surface Based on Cutting Contact Conditions

A new toolpath generation method with feed sensitive zones inspection based on inverse evaluation mechanism.

Planning and virtual simulation machining of multi-axis rough machining strategy for micro-integral impeller

Optimization of Machining Path for Complex Surface Milling in TC11 Based on the K-Means Algorithm