Abstract:Despite recent advances and improvements in modeling and prediction of the dynamics of the machining process, an efficient machining process is limited due to chatter and instability of machining system. In fact, the machining system contains various kinds of joints, which cause difficulties in dynamics modeling, simulation and prediction. Moreover, the flexible support system results in large deformation and violent vibration of the workpiece when machining, and the thin-walled workpiece easily gives rise to the chatter of the machining system. Therefore, the dynamics of the flexible support system was considered to calculate stability lobe diagram in the modeling of milling process. The whole machining system was regarded as a closed loop composed by the machine tool structures, support, workpiece and machining process. In this paper, the receptance coupling (RC) method was introduced to predict the dynamics of the closed machining system. A milling process was taken for example to predict the chatter limitations using the dynamics of closed model. The mathematical model of the machining system (machine tool structures, spindle, holder and tool), together with the details of joint contacts, was given based on the RC method. The RC model was used to obtain the dynamics of the system, while receptance of the tool point was coupled. Based on the coupling model of the machining system, the depth limitations under different speeds were estimated for the technology parameter optimization in milling process. The response was considered to be the sum of the cutting point and the support system. The flexibility of the support system was considered to be the feedback of the cutting stiffness. By this means, the traditional model was modified to calculate the stability lobe diagram based on the dynamics of the spindle and support system. Furthermore, the milling experiment was carried out to verify the prediction results, and the dominant natural frequencies of receptance at tool point were obtained by modal testing to define the stability lobe diagram. It was found that the chatter results matched well with the stability lobes. It was concluded that the support system with poor stiffness might cause violent chatter especially when the workpiece was thin-walled. The cutting depth limitations of the flexible support system were lower than that of the rigid one. Moreover, this closed model of the machining system is appropriate for the chatter prediction of the flexible support system or thin-walled workpiece, so it is helpful for a better parameter optimization.

Path Planning for Support Heads in Mirror-Milling Machining System

Application of Mirror-Milling Machining System to Suppress Vibration in Thin Plate Work-Piece

Research on the Collaborative Machining Method for Dual-Robot Mirror Milling

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Mixed Tiny Path Smoothing Method Based on Sliding Convolution Windows for CNC Machining

Mirror milling trajectory planning for large thin-walled parts based on Fuzzy-ADRC controlled force pre-supporting

Chatter prediction for parallel mirror milling of thin-walled parts by dual-robot collaborative machining system

Modeling and analysis for time-varying dynamics of thin-walled workpieces in mirror milling considering material removal

Approach optimizing tool paths arrangement based on genetic algorithm

Optimization of Tool-Path Generation for Material Extrusion-Based Additive Manufacturing Technology

Spatial Path Planning for Robotic Milling of Automotive Casting Components Based on Optimal Machining Posture

Tool-path planning based on iso-scallop for plunge milling in pocket walls manufacture

End-supporter path scheduling for robot-assisted asymmetrical support machining of thin-walled parts with non-equal thickness and closed section

A Symmetrical Arrangement Strategy Based Real-Time Toolpath Planning Method for a 5-Dof Fully Parallel Machining Robot

Tool path optimization with stability constraints for ball-end milling cutters based on frequency domain controlling strategy

Optimization of tool axis vector for mirror milling of thin-walled parts based on kinematic constraints

Tool-path planning method for kinematics optimization of blade machining on five-axis machine tool

Research on path planning for clear aligner flexible manufacturing

Stability Prediction of Milling Process with Closed Machining System Dynamics with Flexible Thin-Walled Workpiece

An Agent-Based Method for Feature Recognition and Path Optimization of Computer Numerical Control Machining Trajectories

A systematic spatial-variably volumetric error model and machining optimization method based on continuous moving support variation of machine tool