Abstract:A new contactless bubble/slug velocity measurement method of the gas-liquid two-phase flow in small channels is proposed by extending the contactless conductivity detection technique to the contactless impedance detection (CID) technique. Two kinds of CID sensors with different constructions (tubular construction and radial construction) are developed to obtain the total impedance information (the real part, the imaginary part, and the amplitude) of the gas-liquid two-phase flow. Two bubble/slug velocity measurement systems with different constructions, the tubular three-electrode velocity measurement system and the radial four-electrode velocity measurement system, are developed. With the obtained total impedance information, three initial estimation values of the bubble/slug velocity are determined by the principle of the cross correlation velocity measurement. Then, with the real-time flow pattern identification result implemented by the fuzzy C-means, a corresponding velocity measurement model [which is the linear combination of the three initial estimation values of the bubble/slug velocity and is developed by the penalty function method and the Davidon-Fletcher-Powell algorithm] is applied to obtain the final bubble/slug velocity. Two groups of the bubble/slug velocity measurement system prototypes with three different inner diameters are developed. The bubble/slug velocity measurement experiments are carried out. The experimental results show that the proposed method is effective. For the two bubble/slug velocity measurement systems with different constructions, the maximum relative errors of the bubble/slug velocity measurement are all less than 4.5%. The research results also indicate that making full use of the total impedance information is an effective approach to improve the accuracy of the velocity measurement.

Signal Quality of Dual-tip Electrical Conductivity Probe for Measurement of Bubble Parameters

The Measurement of Local Gas Holdup under High Superficial Velocity in Bubble Column

Study on bubble size distribution and local gas holdup in bubble column

Development of a Gas Flow Sensor Based on FS5 Hot-Film Probe

Measurement of Bubble Velocity Using Capacitively Coupled Contactless Conductivity Detection (C4D) Technique

A New Contactless Bubble/Slug Velocity Measurement Method of Gas–Liquid Two-Phase Flow in Small Channels

Measurement of Bubble Velocity Based on C~4D Technique

Local Measurement of Gas-Liquid Bubbly Flow with A Double-Sensor Probe

Liquid–Solid Triboelectric Probes for Bubbles Status Monitoring

Local Measurement of Bubbly Flow in Helically Coiled Tubes Using Double-Sensor Conductivity Probe

Study on new gas flow sensor based on hot-film probe

Analysis and Validation of Ultrasonic Probes in Liquid Level Monitoring Systems

Wavelet analysis of test signal from conductivity probe on single bubble-cap tray plate

Uncertainty Study of Two-Phase Flow Distribution Characteristics Measurement Based on Bubble Trajectory Tracking Method

Influence of Bubble Deformation on the Signal Characteristics Generated Using an Optical Fiber Gas–liquid Two-Phase Flow Sensor

Investigation of the Pressure Probe Properties As the Sensor in the Vortex Flowmeter

An Improved Hot Probe for Measuring Thermal Conductivity of Liquids

CO2 Microelectrode Based on Zn-AI-LDH-ion Carrier and Its Characterization

Measurement of Gas and Liquid Flowing Through Holeson the Compound Tray

An Experimental Study on Local Interfacial Area Concentration Using A Double-Sensor Probe

Study on Performance of Double Helical Capacitance Probe for Water Fraction Measurement in Multiphase Flow