Abstract:The internal flow evolution of the pump was induced with impeller movement. In various conditions, the peak load on centrifugal blade under the change of rotational speed or flow rate was also changed. It would cause an error when inertia load with a safety coefficient (that was difficult to ascertain) was applied in structure design. In order to accurately analyze the impeller stress under various conditions and improve the reliability of pump, based on a mixed flow pump model, the stress distribution characteristic was analyzed under different flow rates and rotational speeds. Based on a three-dimensional calculation model including impeller, guide blade, inlet and outlet, the three-dimension incompressible turbulence flow in the centrifugal pump was simulated by using the standard k-epsilon turbulence model. Based on the sequentially coupled simulation approach, a three-dimensional finite element model of impeller was established, and the fluid-structure interaction method of the blade load transfer was discussed. The blades pressure from flow simulation, together with inertia force acting on the blade, was used as the blade loading on solid surface. The Finite Element Method (FEM) was used to calculate the stress distribution of the blade respectively under inertia load, or fluid load, or combined load. The results showed that the blade stress changed with flow rate and rotational speed. In all cases, the maximum stress on the blade appeared on the pressure side near the hub, and the maximum static stress increased with the decreasing of the flow rate and the increasing of rotational speed. There was a big difference on the static stress when inertia load, fluid load and combined loads was applied respectively. In order to more accurately calculate the stress distribution, the structure analysis should be conducted due to combined loads. The results could provide basis for the stress analysis and structure optimization of pump.

THE KEY TECHNIQUES FOR CALCULATION OF THE SOLID-ELASTIC STRESS FIELD WITH THE FINITE DIFFERENCE METHOD

CFD Calculation and Analysis of Cooling Jacket Flow and Heat Transfer for Car Engine

Study on Numerical Methods for Conjugate Heat Transfer Simulation of an Air Cooling Turbine

Numerical Simulation of Thermal Stress of Diesel Engine Cylinder Block Castings Under Two Different Constraints

Numerical simulation analysis of thermal stress fields during solidification of steel casting

THE ANALYSIS FOR STRESS AND DEFORMATION OF SOLID ROCKET ENGINE BY USING THE TOTAL-LAGRANGIAN INCREMENTAL FINITE ELEMENT METHOD

Finite-element Analysis of Liquid-Storage Tank Foundations Using Settlement Difference As Boundary Condition

Analysis of thermal-mechanical coupling strength and fatigue life of cylinder head

Numerical Simulation Of Casting Thermal Stresses Using Finite Difference Method

Computation of Stress Distribution in a Mixed Flow Pump Based on Fluid-Structure Interaction Analysis

Thermal stresses analysis of an engine cylinder block casting based on finite difference Meshes

Finite element calculation on unsteady temperature field and thermal stress

A Damped Dynamic Finite Difference Approach for Modeling Static Stress–Strain Fields

Inelastic stress analysis of pressurized rectangular passage with multiple internal fins

Dynamic simulation of nozzle structure based on thermal-fluid-solid coupling analysis

"A Numerical Study of Convergence Speed in Solving Stress Field by Control Volume Based Finite Difference Method"

Numerical Simulation of Temperature Field and Stress Field of the Valve Box of a Steam Turbine

Double-sided fluid-structure coupling dynamic thermal analysis method

The Turbine Rotor Thermal-stress Online Monitor and Fatigue Life Analysis

Stress analysis of heat exchange tube with inner and outer fins under convection heat transfer conditions

Study on Numerical Simulation Method of Periodic Symmetric Struts Support Coupling with Heat Flow and Solid