Characterization of Scandate Cathode Emission

Xizhu Zhang,Yiman Wang,Jinshu Wang,Wei Liu

DOI: https://doi.org/10.1109/ivelec.2009.5193584

2009-01-01

Abstract:Characterization of emission properties of scandia doped dispenser (SDD) cathodes with Longo-Vaughan equation has been discussed in this paper.

What problem does this paper attempt to address?

Study of surface nano-particles of scandate cathodes

Xizhu Zhang,Yiman Wang,Jinshu Wang,Wei Liu

DOI: https://doi.org/10.1109/IVESC.2010.5644462

2010-01-01

Abstract:Scandate cathode exhibits the highest emission property among all the thermionic cathodes. Scanadia Doped Dispenser cathode (SDD cathode) is one of the promising cathodes due to its good emission property and reproducibility. The impacts of local electric field enhancement on emission capability of cathode have be considered by applying the actions of Schottky effect and electric field on semiconductor model presented by D. Wright[1]. The calculation results show that the current densities near the spherical nanoparticles are less than 2 times higher than that of the surrounding area. After operating with high current densities at high temperatures for a relative long time, this function was reduced due to the loss of the nanoparticles.
Emission Mechanism of High Current Density Scandia-Doped Dispenser Cathodes

Yiman Wang,Jinshu Wang,Wei Liu,Xizhu Zhang,Lili Li

DOI: https://doi.org/10.1116/1.3609251

2011-01-01

Abstract:The emission mechanism of scandia-doped dispenser (SDD) cathodes is characterized based on systematic investigation of microstructure, surface behavior, evaporation, and emission. High current density SDD cathodes have been developed in recent years to meet the requirements of advanced vacuum electron devices. Space charge limited current densities of over 100 A/cm2 have been reliably reached at a temperature of 950 °Cb. SDD cathodes are composed of a tungsten matrix with submicron structure and uniformly dispersed materials containing Sc, Ba, Ca, Al, and O as nanosized particulates in the matrix. The authors conclude that the copious electron emission from this cathode type results from a layer of Ba–Sc–O on W formed after activation on top of the matrix. This layer is about 100 nm thick and maintains a stable composition over its lifespan. Its emission can be explained in terms of a semiconductor layer with characteristics that differ from a metal-like emission model. The Ba–Sc–O layer is formed by codiffusion of Sc, Ba, and O (generated inside the W-matrix) to the surface of the W-matrix during activation. Furthermore, this layer guarantees a low evaporation rate of emission-relevant materials and thus enables a longer lifespan.
Emission characteristics of nanosized-scandia doped dispenser cathodes at different operating modes

Yiman Wang,Wei Liu,Jinshu Wang,Xizhu Zhang

DOI: https://doi.org/10.1109/IVEC.2011.5747032

2011-01-01

Abstract:Emission properties of nanosized scandia doped dispenser (SDD) cathodes tested at pulse mode with different pulse widths and duty cycles as well as at DC mode are reported and discussed in this paper.
Correlation Between Emission Behavior and Surface Features of Scandate Cathodes

Yiman Wang,Jinshu Wang,Wei Liu,Lili Li,Yanchun Wang,Xizhu Zhang

DOI: https://doi.org/10.1109/ted.2009.2015619

IF: 3.1

2009-01-01

IEEE Transactions on Electron Devices

Abstract:Special emission behaviors have been observed historically and recently on scandate cathodes. For a better understanding of the phenomena, we investigated the correlation between emission properties of scandia-doped dispenser cathodes and their surface features. The influence of external electric fields on the semiconductor layer of the cathodes is suggested to be mainly responsible for the special emission characteristics.
Correlation of emission behavior and surface feature of Scandia doped dispenser cathodes

jinshu wang,yanchun wang,lili li,wei liu,xizhu zhang

DOI: https://doi.org/10.1109/IVELEC.2008.4556419

2008-01-01

Abstract:In this work we investigated the correlation between the emission properties of Scandia doped dispenser cathodes and their surface features. A proposal for explanation of the observed phenomena has been suggested.
Preparation and Characterisation of Scandia Doped Dispenser Cathodes

Jinshu Wang,Xi Wang,Wei Liu,Yuntao Cui,Yiman Wang,Meiling Zhou

DOI: https://doi.org/10.1504/ijnt.2013.050887

2013-01-01

International Journal of Nanotechnology

Abstract:Scandia doped dispenser cathodes were prepared by powder metallurgy method using mixed powder of scandia doped tungsten, barium–calcium aluminates obtained by sol–gel method. The scanning electron microscope observation results indicate that the cathode has submicron quasi–spherical tungsten grains structure with homogeneous distribution of Sc2O3 and barium–calcium aluminates which dispersed over and among W grains. The cathode exhibits good emission property, i.e. the current density of this cathode can reach more than 40A/cm² at 850°Cb. The cathode has low work function of 1.43 eV. Active substance of Sc, Ba and O diffuse from the inner part of cathode to the surface to form a Ba–Sc–O multilayer having certain ratios of Ba:Sc:O which contains much more Ba than normal dispenser cathode at the surface of Sc2O3–W matrix cathode during the activation period. This active–multi–layer is considered to be responsible for copious emission capability.
Electron Emission of Scandia-Doped Dispenser Cathodes

WANG Hui,LI Ji,PAN Ke-xin,LIAN Yan-qiang,WANG Jin-shu,WANG Yi-man,LIU Wei

DOI: https://doi.org/10.3969/j.issn.1002-8935.2006.05.005

2006-01-01

Abstract:The scandia-doped dispenser cathodes were tested in the planar diode with a water cooling anode.The results indicate that its current density is far higher than that of the other kinds of cathodes.The cathode presented in this paper has a work function of 1.55 eV with a electron emission constant of 1.126 A/cm~2K~2 at 849℃.Miram plot is used to investigate the under-heating characteristics and the electron emission property of the cathode.
INVESTIGATION OF INFLUENCE OF SURFACE NANOPARTICLE ON EMISSION PROPERTIES OF SCANDIA-DOPED DISPENSER CATHODES

Xizhu Zhang,Jinshu Wang,Yiman Wang,Wei Liu,Meiling Zhou,Zhiyuan Gao

DOI: https://doi.org/10.1142/s1793604713500409

IF: 1.4901

2013-01-01

Functional Materials Letters

Abstract:The microstructure of a fully activated scandia doped dispenser (SDD) cathode has been studied by scanning electron microscope (SEM). The observation results display that nanoparticles appear at the growth steps and the surface of tungsten grains of the fully activated SDD cathode. To study the influence of the nanoparticles on the emission, the local electric field strengths around the nanoparticles have been calculated by Maxwell 2D code and Comsol. The calculation results show that the local electric field strengths are enhanced by 1.1 to 3.8 times to average value based on different model conditions. The highest field strength is about 1.54 × 105 V/cm at an average field strength of 40 KV/cm, which is related to a space-charge limited (SCL) current density of 100 A/cm2 in the experimental configuration. This implies the field strength is not high enough to cause field emission.
Character And Application Of Scandia Doped Dispenser Cathodes With Concave Surfaces

wei liu,fan yang,yiman wang,xiaoce zhu,xiang liu,jinshu wang

DOI: https://doi.org/10.1109/ivec.2015.7223902

2015-01-01

Abstract:Since the cathodes with concave surfaces are required for the practical applications in most high-power vacuum electron devices, characteristics of nanosized-Scandia Doped Dispenser (SDD) cathodes with concave surfaces have been investigated, especially in dc applications. A space charge-limited (SCL) dc current density of over 50 A/cm(2) has been measured at 1000 degrees C-b. An on-going life test with a dc load of up to 40 A/cm(2) at 970 degrees C-b has been completed about 3000 hours of operation to date. The emission performance of the cathode was further evaluated in an electron gun test tube, which is a part of an mm wave CW-TWT, before the practical application in the real devices.
Characteristics of Scandate-Type Cathode with Sub-Micron Structure Sc/sub 2/o/sub 3/ Doped Tungsten Bodies

GU Xin,LIU Wei,PAN Ke-xin,ZHANG Ke,YUAN Hai-qing,WANG Yi-man,WANG Jing-shu,LI Ji,ZHOU Mei-ling

DOI: https://doi.org/10.1109/ivesc.2004.1414170

2005-01-01

Abstract:Development and improvement of scandate-type cathode have been continuously in progress in last decade and recent years. Required by some new devices such as high power microwave sources, cathodes with current density of up to 100A/cm/sup 2/ at low pulse durations and relevant lifetime are being developed. Scandate type cathode has shown the emission capability of approaching to 100A/cm/sup 2/ or even more. Uniformization in emission, robustness in real environment and reproducibility in manufacturing process may be the major problems for their practical use. Based on previous study, we further developed the Scandia doping technique and cathode fabrication process. Cathodes with sub-micron structure Sc/sub 2/O/sub 3/ doped porous tungsten bodies have been successfully fabricated. Repeatable high emission properties were also verified for different batches of cathodes.
DC Emission Characteristic of Nanosized-Scandia-Doped Impregnated Dispenser Cathodes

Wenlong Liang,Yiman Wang,Jinshu Wang,Wei Liu,Fan Yang

DOI: https://doi.org/10.1109/ted.2014.2319298

IF: 3.1

2014-01-01

IEEE Transactions on Electron Devices

Abstract:To meet the requirements for advanced vacuum electron devices and modern electron beam instruments, dc emission properties of nanosized-scandia-doped impregnated (SDI) cathodes have been investigated in a closely spaced diode configuration system with water-cooled copper anode. The SDI cathodes were made from nanosized-scandia-doped tungsten powder, which was produced by a spray-drying process. A space-charge-limited dc current density of over 60 A/cm(2) has been measured at 950 degrees C-b. An on-going life test with a dc load of 30 A/cm(2) at 950 degrees C-b has completed more than 2000 h of operation to date. The electron cooling for dc beam emission is discussed.
Effect of Scandia Doping Method on the Emission Uniformity of Scandate Cathode with Sc2O3–W Matrix

Jinshu Wang,Chen Lai,Wei Liu,Fan Yang,Xizhu Zhang,Yuntao Cui,Meiling Zhou

DOI: https://doi.org/10.1016/j.materresbull.2013.05.069

IF: 5.6

2013-01-01

Materials Research Bulletin

Abstract:Scandia doped tungsten matrix dispenser cathodes were manufactured using scandia doped tungsten powder prepared by mechanical mixing, liquid-solid doping and a spray drying method. It is found the macrostructure of the cathode depended on the powder preparation method. The cathode prepared using the powder prepared by spray drying method had a homogenous and porous matrix characterized with grains with a diameter of less than 1 pm and with many nanoparticles distributing uniformly around these grains. The cathode with submicron structure and uniform distribution of scandia exhibited good emission uniformity. The emission uniformity Delta J/J of the cathode prepared by spray drying method was 0.17, about 6 times lower than that of the cathode prepared by mechanical mixing method. The calculation results showed that the nanoparticles led to electric field enhancement. A Ba-Sc-O multilayer on the cathode surface and nanoparticles distributing mainly on W grains contributed to the emission property of the cathode. (C) 2013 Elsevier Ltd. All rights reserved.
P3-37: Emission characteristics of Sc- doped dispenser cathodes in electron gun open structures

Wei Liu,Yiman Wang,Lei Zhao,Lili Li,Xizhu Zhang,Jinshu Wang

DOI: https://doi.org/10.1109/IVELEC.2010.5503378

2010-01-01

Abstract:Emission properties of Scandia Doped Dispenser (SDD) cathodes tested in Pierce Gun open structures have been reported in this paper. 80-100 A/cm2 Space-Charge Limited (SCL) current densities have been obtained at designed anode voltages and normal operating temperatures for cathodes with either flat surfaces or concave surfaces. The influences of anode effects on cathodes, which appear in close-spaced diodes, are discussed in the paper.
A Study of Scandia-Doped Pressed Cathodes

Jinshu Wang,Wei Liu,Lili Li,Yanchun Wang,Yiman Wang,Meiling Zhou

DOI: https://doi.org/10.1109/TED.2009.2015423

IF: 3.1

2009-01-01

IEEE Transactions on Electron Devices

Abstract:Scandia (Sc)-doped pressed cathodes were prepared by different methods, including mixing of scandium oxide and barium-calcium aluminates with tungsten by manual mechanical mixing, high-energy ball-milling, and liquid-liquid doping. The surface behavior of the active substance, microstructure, and emission properties of the cathodes has been studied by auger electron spectroscopy, scanning electron...
Development of scandate cathode and its prospect_ a review

Yiman Wang,Jinshu Wang,Wei Liu

DOI: https://doi.org/10.1109/IVESC.2012.6264158

2012-01-01

Abstract:Summary form only given. High current density scandate cathodes have aroused great interest in recent years. In this paper the emission performances of scandate cathodes and the possible chemical and physical processes occurred during cathode manufacturing and operation are summarized. Emission mechanisms are further discussed. The major problems of this kind of cathode and its application prospects are reviewed.
Operation Process of High Current Density Scandia Doped Dispenser Cathodes

Yiman Wang,Wei Liu,Jinshu Wang

DOI: https://doi.org/10.1109/ivesc.2010.5644386

2010-01-01

Abstract:In this paper, operation process of scandia-doped dispenser cathodes is studied based on surface behavior, evaporation and emission properties during preparation, activation, operation and life duration.
Surface characteristics of scandate dispenser cathodes during life

Jinshu Wang,Yiman Wang,Xi Wang,Xizhu Zhang

DOI: https://doi.org/10.1109/IVEC.2013.6571168

2013-01-01

Abstract:To find the changes of surface compositions during life time of the Scandia-doped impregnated dispenser cathodes, two cathodes have been tested at an activation temperature of 1150°CB-Mo and an operation temperature of 1000°CB-Mo , respectively, in an AES system up to more than 7,000 hours. Surface compositions were monitored in-situ at intervals. The tested results have been reported and discussed in this paper.
Investigation of Nanosized-Scandia-Doped Dispenser Cathodes with Machined Surfaces

Fan Yang,Jinshu Wang,Yiman Wang,Wei Liu,Xiaoce Zhu

DOI: https://doi.org/10.1109/ted.2016.2528580

IF: 3.1

2016-01-01

IEEE Transactions on Electron Devices

Abstract:Since the cathodes with machined surfaces are required for the practical applications in some high-power vacuum electron devices, the characteristics of nanosized-scandia-doped dispenser (SDD) cathodes with machined surfaces have been investigated, especially in dc applications. In order to reopen the surface pores, which may be smeared by machining procedure, the cathode surface was washed by Ethylene Diamine Tetraacetic Acid (EDTA) solution and prolonged time was taken for the cathode activation. The emission test results show that the SDD cathodes with machined surfaces exhibit better emission performances after treatment. The space-charge-limited dc emission current density of over 20 A/cm(2) at 900 degrees C-b has been measured with temperature compensation for electron cooling after full activation. An on-going life test with a dc load of up to 40 A/cm(2) at 970 degrees C-b has been completed similar to 5000 h of operation to date. Since the emission capability can be fully restored after exposing to air and reactivating for a short time, a preheating procedure is favorable for SDD cathode with machined surface in the practical applications. Surface analysis indicates that a recrystallization of tungsten grains occurs during the prolonged heating process, leading to further reopening of the surface pores. As a result, cathode surface is covered uniformly by active elements of Ba and Sc (as well as O) as on an unmachined surface, thereby maintaining the high emission property of the SDD cathode.
A review on scandia doped tungsten matrix scandate cathode

Jinshu Wang,Yunfei Yang,Yiman Wang,Wei Liu,Meiling Zhou,Tieyong Zuo

DOI: https://doi.org/10.1007/s42864-019-00007-8

2019-01-01

Tungsten

Abstract:As the cathode with the highest electron emission capability in the thermionic cathode, the scandate cathode has attracted more and more attention in recent years, especially the scandia doped tungsten matrix scandate cathode. Experimental studies show that scandia doped tungsten matrix scandate cathodes with submicron microstructures exhibit excellent emission capacity, and the pulse emission current density in the space-charge region can be over 35 A cm −2 at 850 °C b . In the direct current (DC) condition with temperature compensation, the emission current density could reach 25 A cm −2 at 850 °C b . The device lifetime is over 3700 h after operating at 950 °C b with the DC loading of 40 A cm −2 . The emission mechanism of the scandate cathode including the effect of the surface structure and composition on the work function of the cathode are systematically reviewed.
Recent progresses on nanosized-scandia-doped dispenser cathodes

yiman wang,jinshu wang,wei liu,wenlong liang,fan yang

DOI: https://doi.org/10.1109/IVEC.2014.6857485

2014-01-01

Abstract:In this paper, the recent progresses on nanosized-scandia-doped impregnated (SDI) dispenser cathodes made in this research group are reviewed. Spray-drying process, a new method for nonosized-scandia-doped tungsten powder preparation, has been developed. Compared with the formerly used sol-gel technique, the new method results in more controls over the tungsten grain size and morphology. Similar emission level can be reached for the cathodes made from this kind of powder to that of made by sol-gel process. Continuously pulsed emission life test at about 50 A/cm2 has been carried out in a Pierce-gun open structure tube at e beam inc., USA and has been steady for nearly the entire period of 1000 hours. A knee temperature as low as 900 °CB-Mo for initial current density of 58 A/cm2 was estimated from the Miram curve. DC emission has been evaluated in a closely-spaced diode system with water-cooled copper anode. Over 60 A/cm2 space charge limited (SCL) DC current density was repeatedly measured at 950 °CB-Mo. Below this level the DC and pulsed emission are agree well. In DC life test at 950 °CB-Mo, an initial current density of 20 A/cm2 rose gradually to about 30 A/cm2 during first several hundred hours then remained stably for more than 2000 hours. The increase in emission capability has also be verified by a comparison of I/V characters at beginning and 1000 hours of the life test. The improvement of emission performance for SDI cathodes has been correlated to the surface composition changes during life which was performed by in situ surface analysis.

Characterization of Scandate Cathode Emission

Study of surface nano-particles of scandate cathodes

Emission Mechanism of High Current Density Scandia-Doped Dispenser Cathodes

Emission characteristics of nanosized-scandia doped dispenser cathodes at different operating modes

Correlation Between Emission Behavior and Surface Features of Scandate Cathodes

Correlation of emission behavior and surface feature of Scandia doped dispenser cathodes

Preparation and Characterisation of Scandia Doped Dispenser Cathodes

Electron Emission of Scandia-Doped Dispenser Cathodes

INVESTIGATION OF INFLUENCE OF SURFACE NANOPARTICLE ON EMISSION PROPERTIES OF SCANDIA-DOPED DISPENSER CATHODES

Character And Application Of Scandia Doped Dispenser Cathodes With Concave Surfaces

Characteristics of Scandate-Type Cathode with Sub-Micron Structure Sc/sub 2/o/sub 3/ Doped Tungsten Bodies

DC Emission Characteristic of Nanosized-Scandia-Doped Impregnated Dispenser Cathodes

Effect of Scandia Doping Method on the Emission Uniformity of Scandate Cathode with Sc2O3–W Matrix

P3-37: Emission characteristics of Sc- doped dispenser cathodes in electron gun open structures

A Study of Scandia-Doped Pressed Cathodes

Development of scandate cathode and its prospect_ a review

Operation Process of High Current Density Scandia Doped Dispenser Cathodes

Surface characteristics of scandate dispenser cathodes during life

Investigation of Nanosized-Scandia-Doped Dispenser Cathodes with Machined Surfaces

A review on scandia doped tungsten matrix scandate cathode

Recent progresses on nanosized-scandia-doped dispenser cathodes