Abstract:Scandate cathodes have received widespread attention due to the high emission current density, existing results have shown that the content of strontium in impregnant has a certain degree of impact on the emission property of scandate cathodes. In this work, the mechanism by how strontium affects the emission property was investigated through experiments and theoretical analysis. Five precursor powders with different strontium element contents were prepared by freeze-drying method, and the impregnant was obtained after sintering. Then composition analysis was conducted on the impregnant and prepared experimental cathodes for emission performance testing, also the surface emission structure of cathode was established for density functional theory (DFT) calculations. The experimental results indicated that the variation in strontium content can alter the material composition of the impregnant and have impact on cathode emission performance. During the process of increasing strontium content from 0 to 12 atom%, the emission performance of the experimental cathodes increased first and then decreased. Under a testing temperature of 1100 , the cathodes with 6 atom% Sr have the highest emission current density of 34.9 A/cm2 at 260 V dc and 523.2 A/cm2 at 2000 V pulse voltage among the five experimental cathodes, and this cathode exhibits good emission uniformity. DFT results indicate that strontium does not directly participate in reducing the work function of cathode surface. It can be considered that strontium has a promoting effect on the formation of active substance, an appropriate amount of strontium promotes the formation of emitting active substance Ba2ScAl5 during the preparation process of the impregnant, thus promoting the improvement of cathode emission performance; while excessive strontium can lead to the generation of impurities that lower the emission performance of cathodes.

Correlation Between Emission Behavior and Surface Features of Scandate Cathodes

Sc-Containing (Scandate) Thermionic Cathodes: Mechanisms for Sc Enhancement of Emission

A Review of Sc-containing "Scandate" Thermionic Cathodes

Investigation on the Impact of Sr on Emission Property of Scandate Cathodes

Growth and Faceting of Tungsten and Oxides in Scandate Cathode Particles during In Situ Heating in the Scanning Electron Microscope

Effect of Sr-Doping on the Emission-Active Materials of Scandate Cathodes

Understanding the surface structure evolution and electron emission behaviors during the activation of Ir-coated dispenser cathodes

Scandium function in “scandate” thermionic cathodes: A microspot synchrotron radiation x-ray photoelectron spectroscopy study of co-adsorbed Ba-Sc-O on W(100)

R&D of Electron Emission from Ferroelectric Cathodes

Enhancing the thermionic electron emission performance of hafnium with nanocluster doping

The effect of Ir and Sc on the emission capacity of W–Ir matrix scandate cathodes prepared via a novel in situ method

Physics-based Model for Nonuniform Thermionic Electron Emission from Polycrystalline Cathodes

Electrochemiluminescence Behaviors of Eu3+-doped CdS Nanocrystals Film in Aqueous Solution

Electron Emission from Lead Lanthanum Zirconate Titanate Ferroelectric Cathodes

Effects of the Surface Treatment of Silicon Substrate on the Field Emission Characteristic of A Silicon and Amorphous Diamond Cold Cathode Emitter

Estimation time delay from field emission to secondary electron emission avalanche in vacuum surface flashover

Characterization, Cathodoluminescence and Field-Emission Properties of Morphology-Tunable CdS Micro/nanostructures

Study of cathode emission surface defects in relativistic magnetrons

Effect of in Situ Cs Treatment on the Field Emission Characteristics of Amorphous Diamond Films

Observation of Field-Emission Dependence on Stored Energy.

Strong Surface Effect on Cathodoluminescence of an Individual Tapered ZnO Nanorod