Abstract:The residual stresses and welding distortion of large welded structure are more serious due to the long welded-lines. Numerical simulation is a powerful tool in residual stresses and distortion control. But long computational time for thermo-mechanical simulation of welding process hinders the application of this technique in large welded structure. During manufacturing aluminum alloy train carriage, the welding distortion of carriage roof, which is 12m long and with 12 welds, is an important factor resulting in assembly mismatch. A high efficiency numerical simulation method, segmented temperature function method, was applied in this study to shorten the computing time. The quasi-steady state character of welding process was exploited in segmented temperature function method. Also the temperature and temperature history dependent material property models were established and applied. The constraint of fixture on structure was also considered. By means of FEA study, it was found that the main welding distortion pattern is the transverse distortion of carriage roof structure. On-site measurement of the real structure was then carried. The numerical simulation results corresponded well with the measured distortions. The errors between computed results and the experimental results were no more than 15%. The transverse section of carriage roof was optimized based on numerical simulation. The simulation results showed that the distortion of structure after optimization was reduced to 20% of that of original structure. Structure with the same transverse section as optimized has been produced and its distortion corresponded well with the simulation. These results proved the effectiveness of this high efficiency numerical simulation.

Prediction for Welding Deformation Reducing by Welding Sequence Optimization of Upper Plate

Simulation and prediction for welding deformation on welding procedure of hand pallet truck

Numerical Prediction and Control of Deformation and Residual Stress in Double-Sided Arc Welding of Large Pressure Hull

Prediction of Double-Sided Arc Welding Deformation Based on Dynamic Heat Distribution Model and TEP-FE Approach

Investigation of Angular Deformation Control for T-joint Rib Using Multi-Point Constraint Method

Reverse Deformation Design for Bending Control in Welding of Ring Stiffeners

Research on welding deformation for box girder of bridge crane based on thermal elasto-plastic theory

Impact Analysis of Welding Sequence to Reduce Weld Deformation in Aluminum Hulls

Optimizing welding sequence of TIG cross-joint of Invar steel using residual stresses and deformations

Welding Distortion Prediction and Mitigation in Thick Steel Plate Structures on Ships

Numerical Optimization of the Welding Sequence for Mitigating Welding Deformation in Aluminum Pipe Structures by Using a Genetic Algorithm

Influence of Initial Structural Dimensions of Plates on Welding Distortion

A Study on the Effects of Welding Deformation According to Weld Sequence in Overlay-Welded Structures

Numerical computation methods of welding deformation and their application in bogie frame for high-speed trains

Making an Approaehing to Deformation of T-structure of Bridge Cranes in Assembling and Welding

Numerical Prediction of Welding Distortion Considering Gravity Force on General Ship Grillage Structure by Elastic Finite Element Method Using Inherent Strain

Prediction and Application of Welding Residual Deformation of Steel Sheets

Welding Sequence in Large Thin-Walled Structures by Means of Local-Global and Welding Macro Element

Investigating Welding Distortion of Thin-Plate Stiffened Panel Steel Structures by Means of Thermal Elastic Plastic Finite Element Method

Process optimization to control welding distortion of aluminum alloy train roof by high efficiency numerical simulation

Research Of Weld On Axial Buckling Stress Of Multilayer Combined Cylindrical Shells