Abstract:As a highly efficient thick plate welding resolution, narrow gap gas tungsten arc welding (NG-GTAW) is in the face of a series of problems like inter-layer defects like pores, lack of fusion, inclusion of impurity, and the sensitivity to poor sidewall fusion, which is hard to be repaired after the welding process. This study employs numerical simulation to investigate the molten pool behavior in NG-GTAW root welding. A 3D numerical model was established, where a body-fitted coordinate system was applied to simulate the electromagnetic force, and a bridge transition model was developed to investigate the wire–feed root welding. The simulated results were validated experimentally. Results show that the molten pool behavior is dominated by electromagnetic force when the welding current is relatively high, and the dynamic change of the vortex actually determines the molten pool morphology. For self-fusion welding, there are two symmetric inward vortices in the cross-section and one clockwise vortex in the longitudinal section. With the increasing welding current, the vortices in the cross-section gradually move to the arc center with a decreasing range, while the vortex in the longitudinal section moves backward. With the increasing traveling speed, the vortices in the cross-section move toward the surface of the molten pool with a decreasing range, and the horizontal component of liquid metal velocity changes in the longitudinal section. For wire–feed welding, the filling metal strengthens the downward velocity component; as a result, the vortex formation is blocked in the cross-section and is strengthened in the longitudinal section.

Study on weld formation in a novel rotating arc horizontal GMAW

Study on Forming Mechanism of Appearance Defects in Rotating Arc Narrow Gap Horizontal GMAW

Application of Rotating Arc System to Horizontal Narrow Gap Welding

Effect of Rotating Arc Process on Molten Pool Control in Horizontal Welding

Microstructure and Formation Characteristics of Rotating Arc Horizontal GMAW Joint

Rotating arc horizontal narrow gap welding of high strength quenched and tempered steel

Study on Elimination of Interlayer Defects in Horizontal Joints Made by Rotating Arc Narrow Gap Welding

Effects of Processing Parameters on Molten Behavior, Arc Stability, and Defect Forming in Swing-Arc Narrow Gap GMA Vertical Up Welding

Metal Transfer Characteristics of Rotating Arc Narrow Gap Horizontal GMAW

Effects of Wire Rotating Frequency on Metal Transfer Process in Rotating Arc Narrow Gap Horizontal Gmaw

An Innovative Methodology in Narrow Gap GTAW for Alternating Magnetic Field with Synchronous Swing of Filler Wire and Arc

Molten pool behaviour and weld forming mechanism of tandem narrow gap vertical GMAW

Study on Rotating GMAW Technology of Big Thickness Steel with Narrow Groove

Research on New Heat Source Model of Variable Polarity Plasma Arc and Welding Forming in Horizontal Position

Study on Arc Behavior and Weld Formation of Magnetically Controlled Narrow Gap TIG Welding

Numerical simulation on molten pool behavior of narrow gap gas tungsten arc welding

Stirring effect of the rotating arc on the molten pool during non-axisymmetric tungsten NG-GTAW

A novel rotating wire GMAW process to change fusion zone shape and microstructure of mild steel

Horizontal Welding of Aluminium Alloys by Soft Plasma Arc

Weld Morphology and Grain Growth Characteristics of Driven Moving Arc Hollow Stud Welding

Effect of Swing Arc on Molten Pool Behaviors in Narrow-Gap GMAW of 5083 Al-alloy