Abstract:The deformation of closed-cell aluminum foam (CAF) in different solid–liquid–gas coexisting state was studied in this paper. The results showed that the most suitable temperature of the CAF deformation was about 635 °C, which made the CAF have maximum deformation, but its characteristic parameters changed slightly. Moreover, the multi-grain cell wall and small size cell were helpful to the CAF deformation in the solid–liquid–gas coexisting state. When the CAF deformed at 635 °C, the inter-granular solidification microstructure and part of the primary α-Al grain were melted into liquid. The fixed or inter-locked primary α-Al grain was released and changed into the distributed discretely near-spherical grain, making the cell wall have good thixotropy. At the same time, the gas pressure in the cell was recovered to the foaming stage, so the gas pressure could be close to the flow stress of cell wall. During the CAF deformation in the solid–liquid–gas coexisting state, the cell wall deformed in thixotropic under the supporting and coordinating of the gas pressure in the cell, meanwhile, the cell was moved following the cell wall deformation. Therefore, the CAF deformation was affected by the types of the cell walls and the cell size. Graphic Abstract In this paper, the mold forming process was used to study the influence of temperature on deformation of the closed-cell aluminum foam (CAF) that in solid–liquid–gas coexisting state. When the CAF was deformed in solid–liquid–gas coexisting state who has strong deformation capacity, moreover, whose characteristic parameters are largely unchanged. However, shape forming of the closed cell aluminum foam only could be realized in specific solid–liquid–gas coexisting state, which was mainly related to the deformation temperature.

Experimental study on cellular structure statistical analysis and uniaxial deformation behavior of closed-cell aluminum foam

Early Compressive Deformation of Closed-Cell Aluminum Foam Based on a Three-Dimensional Realistic Structure

Mechanical Simulation of the Localized Deformation in the Aluminum Foams: A Three-Dimensional (3d) Structure Based Study

Study on Cell Deformation of Low Porosity Aluminum Foams under Quasi‐Static Compression by X‐Ray Tomography

High temperature and mesostructure effect on aluminum foam compression responses

THE MECHANICAL BEHAVIORS OF CLOSED-CELL ALUMINUM-ALLOY FOAMS WITH SPHERICAL PORES

Modeling of Macro-Deformation Behavior of Thin-Walled Aluminum Foam by Gas Injection Method

Coupling Effect Of Porosity And Cell Size On The Deformation Behavior Of Al Alloy Foam Under Quasi-Static Compression

Effects of cell wall property on compressive performance of aluminum foams

Damage kinetics and compression behavior of Al alloy foam using in situ SRμCT

Micro-CT in the mechanical properties and energy absorption of closed-cell aluminium foam

Study on Deformation of Closed-Cell Aluminum Foam in Different Solid–Liquid–Gas Coexisting State

Experimental and mesoscopic investigation of double-layer aluminum foam under impact loading

Dynamic and Static Compression Tests and FEA Analyses of Aluminum Foam Specimen with Variable Density in the Loading Direction

Mechanical Properties and Constitutive Model Applied to the High-Speed Impact of Aluminum Foam That Considers Its Meso-Structural Parameters.

Study on the Compression Properties and Deformation Failure Mechanism of Open‐Cell Copper Foam

Quantitative relationships between cellular structure parameters and the elastic modulus of aluminum foam

Collapse Models of Aluminum Foam Sandwiches under Static Three-Point Bending Based on 3D Geometrical Reconstruction

Quasi-static Deformation Mechanism and Compressive Properties of Aluminum Foams Fabricated by Friction Stir Processing

Deformation mechanisms of spherical cell porous aluminum under quasi-static compression

Correlation Between Cell Wall Buckling and Deformation Banding in a Closed-Cell Foam