Abstract:Purpose This paper aims to investigate the moisture diffusion behavior in a system-in-package module systematically by moisture-thermalmechanical-coupled finite element modeling with different structure parameters under increasingly harsh environment. Design/methodology/approach A finite element model for a system-in-package module was built with moisture-thermal-mechanical-coupled effects to study the subsequences of hygrothermal conditions. Findings It was found in this paper that the moisture diffusion path was mainly dominated by hygrothermal conditions, though structure parameters can affect the moisture distribution. At lower temperatures (30°C~85°C), the direction of moisture diffusion was from the periphery to the center of the module, which was commonly found in simulations and literatures. However, at relatively higher temperatures (125°C~220°C), the diffusion was from printed circuit board (PCB) to EMC due to the concentration gradient from PCB to EMC across the EMC/PCB interface. It was also found that there exists a critical thickness for EMC and PCB during the moisture diffusion. When the thickness of EMC or PCB increased to a certain value, the diffusion of moisture reached a stable state, and the concentration on the die surface in the packaging module hardly changed. A quantified correlation between the moisture diffusion coefficient and the critical thickness was then proposed for structure parameter optimization in the design of system-in-package module. Originality/value The different moisture diffusion behaviors at low and high temperatures have seldom been reported before. This work can facilitate the understanding of moisture diffusion within a package and offer some methods about minimizing its effect by design optimization.

Effect of Temperature and Moisture on LED Reliability and Its Mechanism Analysis

Effects of Moist Environments on Led Module Reliability

Effect mechanism of moisture diffusion on LED reliability

The Effects of Humidity and Temperature Aging Test on Flexible Packaging LED Module

Experimental Study and Taguchi Analysis on LED Cooling by Thermoelectric Cooler Integrated with Microchannel Heat Sink

Comparison of LED Package Reliability under Thermal Cycling and Thermal Shock Conditions by Experimental Testing and Finite Element Simulation

Is thermal management outside the package enough for higher LED reliability?

Effects of Moisture Diffusion on a System-in-Package Module by Moisture–Thermal–Mechanical-Coupled Finite Element Modeling

Junction temperature study during degradation process of high power light-emitting diodes

Study on LED Reliability in the Aging Process

Numerical Analysis on Temperature Field in a LED Module

Climatically Accelerated Material Processes Determining the Long-Term Reliability of Light-Emitting Diodes

Reliability Assessment of Light-Emitting Diode Packages with Both Luminous Flux Response Surface Model and Spectral Power Distribution Method

Influences of hygrothermal conditions and structure parameters on moisture diffusion behavior in a system‐in‐package module by moisture-thermal-mechanical-coupled finite element modeling

Research on Failure Mechanism of the Phosphors and Sealants for White Light Emitting Diode Package

Effect Study of Silicone Amount on the Lumen Maintenance of High Power Led under Accelerated Stress Test

Transient Thermal Analysis of High-power LED Package

Experimental Investigation on the Moisture Stability of QDs-LEDs with Layered Packaging Structure

Temperatures and Thermal Stresses in High-Power Light Emitting Diodes

Size and Temperature Effects on Optoelectronic Properties of Micro-LED Arrays for Display Applications

Research on Lumen Depreciation Related to LED Packages by In-Situ Measurement Method