Abstract:Compared with the direct force measurement of cables, dynamic modal testing is more economic and applicable in engineering for monitoring the stiffness change of cable net structures caused by pretension deviation. Normally, it is sufficient to detect the variation of structural key stiffness by testing a few modes (target modes) that are, however, likely located in the region of dense modes. To effectively evaluate the stiffness of an existing cable net structure, the identification accuracy of these target modes should be improved when using conventional time-domain methods, e.g., the eigensystem realization algorithm (ERA). Structural free vibration can be induced by a step excitation that is generated by simultaneously releasing loads hung on the cable net. In this paper, the modal energy in the structural free vibration response is expounded to be determined by the work done by the step excitation loads in the direction of this mode shape. Therefore, the identification accuracy of a target mode can be improved by optimizing the layout and magnitude of the suspended loads to increase its energy proportion in the structural free vibration response and suppress those of its adjacent modes. For a certain set of degrees of freedom (DOFs) that loads are allowed to be suspended, a method is put forward to construct a step excitation load that can guarantee that the suppressed modes do not have an energy contribution to its induced free vibration. Referring to the effective independence (EI) method, an iterative algorithm is developed to select a given number of DOFs for the suspension of the step excitation loads that can ensure the target mode has a relatively large energy proportion. With the solution of generalized Rayleigh entropy, the magnitude of the loads suspended from the selected DOFs is further optimized to achieve the maximum energy proportion of the target mode. An illustrative saddle-shaped cable net roof is employed to validate the accuracy and validity of the proposed method by comparing the modal identification results under the optimized step excitation, conventional impact excitation and random excitation, respectively.

Three-Step Method for Stiffness Identification of Inter-Story Shearing Structures under Ambient Excitation

Nonstationary Seismic Responses of Structure with Nonlinear Stiffness Subject to Modulated Kanai–Tajimi Excitation

Identification of Earthquake Ground Motion Based on Limited Acceleration Measurements of Structure Using Kalman Filtering Technique

Structural dynamic and aerodynamic parameters identification for a tall building with full-scale measurements

Equivalent Dynamic Stiffness Mapping Technique for Identifying Nonlinear Structural Elements from Frequency Response Functions

Various damper forces and dynamic excitation nonparametric identification with a double Chebyshev polynomial using limited fused measurements

Response Of Multiple-Degree-Of-Freedom Flexible Structures To Random Excitation

Simulation and Experiment Study on System Identifications of Elastically Jointed Structures

Experimental Study of Modal Parameter Identification in a Simulated Ambient-Excited Structure

Operational modal parameter identification of structures for non-stationary ambient excitation

Model-free Identification of Multiple Periodic Excitations and Detection of Structural Anomaly Using Noisy Response Measurements

Damping identification using weighted fitting of Frequency-response-function (WFF) method

An Output‐only Structural Condition Assessment Method for Civil Structures by the Stochastic Gradient Descent Method

Modal Parameter Identification of Linear Time Invariant System under Non-stationary Ambient Excitation

Parameters Identification of Linear Structures Undergoing Ambient Excitation Using Mode Decomposition

Quasi-static testing based structural modal parameter estimation

Synchronous identification of nonlinear structural parameters and unknown external excitation based on improved UKF

Unified Theoretical Model of Natural Excitation Technique(NExT) for Multi-Degree-of-freedom Structural Systems

Time-frequency analysis of nonlinear structures under nonstationary excitation by directly solving structural dynamic equation through absolute displacement

Enhanced Subspace Iteration Technique for Probabilistic Modal Analysis of Statically Indeterminate Structures

A Step Excitation Optimization Method for Intensive Modal Identification of Cable Net Structures