Abstract:Wake vortex evolution of a square cylinder with a slot synthetic jet issuing from the cylinder’s rear surface has been experimentally investigated using the time-resolved particle image velocimetry technique. The Reynolds number based on the side length of the square cylinder is $Re=836$. The excitation frequency normalized by the natural shedding frequency $f_{e}/f_{0}$ varies from 0 to 6 at the dimensionless stroke length $L_{0}/w=72.6$. The distributions of the time-averaged Reynolds stresses present significant differences as the excitation frequency increases. With control, the mean streamwise velocity deficit of the wake recovers more quickly in comparison with the natural case, and the vertical velocity fluctuation intensity becomes weaker. Moreover, a drag reduction can be achieved for the control cases, especially, for $f_{e}/f_{0}=4$ and $f_{e}/f_{0}=6$, a thrust instead of drag reduction can be obtained. The profiles of the mean streamwise velocity tend to have jet-like distributions. The wake vortex dynamics and its evolution with the excitation frequency are revealed. (i) For the low excitation frequency cases ($f_{e}/f_{0}=0.5$, 1, 2), no significant changes in the dominant frequency and the spanwise vortex structures are observed in comparison with the natural case. (ii) For the moderate excitation frequency case ($f_{e}/f_{0}=3$), the wake vortex shedding frequency is locked on half of the control frequency. In this case, the shear layer is divided into two parts by the synthetic jet vortex, and the wake vortices with smaller scales still shed asymmetrically and appear closer to the square cylinder. (iii) For the high excitation frequency case ($f_{e}/f_{0}=6$), the flow is governed by the synthetic jet. As a result of strong perturbations of the synthetic jet, the wake vortex shedding becomes symmetric with the shedding frequency consistent with the control frequency. And the separation is suppressed effectively. The different control effects of the slot synthetic jet on a square cylinder and a circular cylinder are also compared in detail. Generally speaking, the circular cylinder is easier to be controlled due to its non-fixed separation points.

Control of vortex shedding from a plate at incidence angles in the range of 0-90 deg

Vortex Separation and Interaction in the Wake of Inclined Trapezoidal Plates

SUPPRESSION OF VORTEX SHEDDING FROM THIN RECTANGULAR CYLINDERS

Wake Vortex Evolution of Square Cylinder with A Slot Synthetic Jet Positioned at the Rear Surface

System Identification and Model Predictive Control of Vortex Shedding Behind a Rotating Cylinder

Control of Vortex Shedding from Two Side-by-side Cylinders Using a Pair of Tangential Jets

Improvement of vortex shedding control and drag reduction on a square cylinder using twin plates

A Vortex Force Study for a Flat Plate at High Angle of Attack

A numerical study of vortex shedding from flat plates with square leading and trailing edges

Numerical simulations of the flapping of a three-dimensional flexible plate in uniform flow

Wake control of a square cylinder: Impinging the vortex cores with dual flexible splitter plates

Effects of Lateral Space and Angle of Attack on Ventilated Partial Cavity

Experimental and Numerical Research on the Viscous Flow Field Induced by a Swing Plate

Noise Control of Blunt Flat-Plate Using Slit and Dielectric Barrier Discharge Plasma

Simulations of passive oscillation of a flexible plate in the wake of a cylinder by immersed boundary method

Force and vortex shedding characteristics of a circular cylinder with flexible splitter plates

Estimating Thrust from Shedding Vortex Surfaces in the Wake of a Flapping Plate

Flow characteristics of a fixed circular cylinder with an upstream splitter plate: On the plate-length sensitivity

An experimental investigation of the flow control of a circular cylinder in near wake with parallel plates at Re = 7500

Suppression of vortex shedding in the wake of a circular cylinder through high-frequency in-line oscillation

Sweeping jet control of flow around a circular cylinder