Abstract:The hydrodynamic performances of a fishlike undulating foil in the wake of a D-section cylinder are numerically investigated by using a modified Immersed boundary method The results regarding the effects of various controlling parameters, including the distance between the foil and the D-cylinder, the frequency and the phase angle of foil's undulation, and the phase angle of heaving motion on the thrust and the input power, are reported It is observed that the foil without undulation in the vortex street can gain a thrust, as a result of the fact that the passing vortices produce reverse flows with respect to the mainstream in vicinity of the foil surface When an undulating foil is placed at different distances behind the D-section cylinder, different wake structures form behind the cylinder The wake area can be divided into three domains suction domain, thrust enhancing domain, and weak influence domain The undulation of the foil can inhibit the roll-up instability of the shear layers and vortex shedding from the cylinder and consequently significantly enlarge the suction domain, compared to the foil-free case or the stationary foil case The thrust on the foil first increases and then decreases, as the distance between the foil and the cylinder increases The undulation plays a negative role in the foil propulsion when the foil is located near the cylinder (largely in the suction domain) and a positive role when the distance between the foil and the cylinder is beyond a critical value The mean thrusts do not vary significantly with the undulation phase angle when the heaving motion is not considered and the undulation amplitude studied is relatively small, instead, they are significantly affected by the phase angle of the heaving motion The foil bypassing the vortices undergoes both minimum thrust and input power, whereas the one passing through vortices experiences a larger thrust The phase angle difference between the heave and the undulation is important (C) 2010 American Institute of Physics [doi 10.1063/1.3504651]

Estimating Thrust from Shedding Vortex Surfaces in the Wake of a Flapping Plate

Vortex Separation and Interaction in the Wake of Inclined Trapezoidal Plates

Control of vortex shedding from a plate at incidence angles in the range of 0-90 deg

Characterizing Three-Dimensional Features of Vortex Surfaces in the Flow Past a Finite Plate

Force and Power of Flapping Plates in a Fluid

A Vortex Force Study for a Flat Plate at High Angle of Attack

Simulations of the Transient Flow Generated from a Started Flat Plate

Stroke-averaged Lift Forces Due to Vortex Rings and Their Mutual Interactions for a Flapping Flight Model

Hydrodynamics of a Flapping Foil in the Wake of a D-section Cylinder

Simulation of the unsteady vortical flow of freely falling plates

Self-propelled Plate in Wakes Behind Tandem Cylinders

NUMERICAL STUDIES ON THE PROPULSION AND WAKE STRUCTURES OF FINITE-SPAN FLAPPING WINGS WITH DIFFERENT ASPECT RATIOS

Numerical simulations of the flapping of a three-dimensional flexible plate in uniform flow

Propulsive Performance and Vortex Shedding of a Foil in Flapping Flight

Experimental and Numerical Research on the Viscous Flow Field Induced by a Swing Plate

A theoretical model for the separated flow around an accelerating flat plate using time-dependent self similarity

Hydrodynamic Performance of A Fishlike Undulating Foil in the Wake of A Cylinder

Three-dimensional vortex wake structure of flapping wings in hovering flight

Vortical Structures in the Wake of Falling Plates

A New Vortex Sheet Model for Simulating Aircraft Wake Vortex Evolution

Propulsive performance and vortex shedding of a foil in flapping motion