SUPPRESSION OF VORTEX SHEDDING FROM THIN RECTANGULAR CYLINDERS

邵传平,林建忠,魏庆鼎
2010-01-01
Abstract:A strip cross-sectional element was used to suppress vortex shedding from thin rectangular cylinders with a width to thickness ratio range B/H of 2.0 ~ 5.0 at Reynolds number Re in the range of 3.75 × 103 ~ 1.05× 104, where B and H are the width and thickness of the cylinder's cross-section, respectively. The cylinder surface in width is parallel to the oncoming flow. The element and the cylinder have the same length and their axes are parallel. The element's width is 0.5, and its thickness is small. The element's position is varied, and its main surface is perpendicular to the oncoming flow. Measurements of wake velocities, together with smoke wire visualization, show that, vortex shedding from both sides of the cylinder is suppressed if the element is placed at points within an effective zone, while mono-side vortex shedding is observed if the element is applied at points within a unilateral effective zone. The effective zone is from upstream the leading edge to downstream the trailing edge of the cylinder, and it is enclosed by the unilateral zone. The areas of the two zones increase with the growth of B/H and decrease with the growth of Reynolds number.
What problem does this paper attempt to address?