Abstract:This paper descirbes leakage current characters and discharge phenomenon of outdoor insulators both in the lab and in the field. The results are hoped to be used for online monitoring of the contamination levels. The following contents are introduced in the paper: leakage current monitoring systems, relationships between leakage current and discharge phenomenon, flashover prediction methods and its applications in the field. The leakage current monitoring system is introduced firstly. Then the relationships between leakage current and discharge phenomenon for both suspension insulators and post insulators are presented based on the laboratory tests. A new parameter (I * ) that accounted for maximum leakage current (Ih) and different insulator shapes is introduced to estimate the flashover voltage for different kinds of pollutant layers when they are saturated with moisture. Meanwhile, the relationships between relative humdity (RH) and maximum leakage curren, altitude and maximum leakage current are investigated. With these results a flashover prediction method is developed. Ih measured in different relative humidity is converted to I * for the same contaminate layer when it is saturated with moisture. Then the flashover voltage is estimated by I * . Furthermore, an online leakage current monitoring results are analyzed. The relationships between leakage current characters in the field and ambient relative humidity are analyzed. The results show that although there are some differences between the leakage current in the field and in the lab because of some especially serve atmospheric conditions, the relationships are similar. Meanwhile, leakage current waveforms in different weather conditions are investigated. The waveforms of leakage current in the field are similar with those in the lab. The leakage current waveform that accounted for strong arc is found in the field. Finally, the contamination level of the field insulator is evaluated. The results corresponds well with the local condition.

Leakage Current and Discharge Phenomenon of Outdoor Insulators

Frequency Characters of Leakage Current on the Surface of Outdoor Insulators in Different Relative Humidity

Analysis of the leakage current pulses of outdoor insulators in different relative humidity

Review on Leakage Current Characteristics of Contamination Insulators

Leakage Current Characteristics of Polluted Insulators at High Altitudes

Research on the Relationship Between Leakage Current of On-Site Insulators and Environmental Factors

Development of Contamination Flashover Pre-Warning System and Analysis of Operating Experience

Mapping Relation of Leakage Currents of Polluted Insulators and Discharge Arc Area

Evaluation of Contamination Levels of Outdoor Insulators Based on the Principal Components Analysis of Leakage Current Pulses

Insulator Contamination Monitoring Based on Its Hygroscopicity Under Unsaturated Humidity

Equivalent Investigation of Natural Contamination and Artificial Contamination Test

Study on the Characteristics of High Frequency Leakage Current of Contaminated Insulator

Icing Flashover Leakage Current of Long Insulator Strings in 500 Kv Transmission Line

Influence of Temperature Difference on Wetting Characteristics of Insulators

Experimental Study on the Contamination Deposition Characteristics of Insulators in a Fog–haze Environment

Mechanism of contaminant accumulation and flashover of insulator in heavily polluted coastal area

Effect of Relative Humidity on the Maximum Leakage Current of Insulators

Influence of Partial Electric Arc on the Contamination Degree Monitoring System in View of Leakage Current

Dynamic Moisture of Energized Insulator Contamination Layers with Humidity Variation

Research on Leakage Current Waveform Spectrum Characteristics of Artificial Pollution Porcelain Insulator

Analysis of Leakage Current along Insulating Surface of Electrical Apparatuses in Substation