Abstract:<p>A two-span and three-story of the frame specimen with a scale of 1:2.5 was tested and investigated under cyclic loading to study the seismic behavior on the composite frame consisting of steel reinforced recycled concrete columns and steel beams. After observing the loading process and failure modes, the mechanical properties of composite frame, such as the load–displacement hysteretic curves, skeleton curves, bearing capacity, interstory displacement angles, ductility, energy dissipation and stiffness degradation, were analysed in detail. On this basis, a finite element model of the composite frame which considered the constitutive properties of recycled concrete was established. The deformation diagram, stress nephogram and calculated skeleton curves of composite frame were obtained, and a nonlinear parameter analysis was also conducted. The experimental and numerical analysis results all show that the plastic hinges appeared at the end of steel beams firstly and then formed at the end of columns, which is a typical plastic hinge failure of frame. The hysteretic curves of frame are shuttle-shaped and full, and the descending section of the skeleton curves and stiffness degradation curves is relatively gentle. The average ductility coefficient, equivalent viscous damping coefficient and ultimate interstory displacement angle of frame are 3.205, 0.303 and 0.04, respectively. Therefore, the composite frame has good deformation, energy dissipation capacity and collapse resistance. The results of the nonlinear parameter analysis on the frame also exhibit that increasing the strength of steel products or recycled concrete is beneficial to the horizontal bearing capacity and lateral stiffness of frame. The maximum increase in the bearing capacity of frame can be 21.5% when the profile steel strength is increased from Q235 to Q390 and the recycled concrete strength is maintained at C40 within the parameters analysed, but the increase in material strength is unfavourable to the deformation capacity of frame. Increasing the axial compression ratio of columns in the frame obviously weakens the lateral displacement ductility of frame, which makes the frame unsafe under an earthquake. In addition, the bearing capacity and stiffness of frame increases with the increase in the linear stiffness of beams and columns. The research conclusions can provide a reference for the engineering application of this type of composite frame.</p>

Nonlinear Model for Seismic Analysis of Steel-Concrete Composite Beams

Improvement of hysteretic constitutive model for reinforcements considering buckling

Nonlinear Finite-Element Analysis of the Seismic Behavior of RC Column–Steel Beam Connections with Shear Failure Mode

A Ductility-Centred Analytical Model for Axially Restrained Double-Span Steel Beam Systems Subjected to Sudden Columns Loss

Pseudo-dynamic testing of hybrid frame with steel beams bolted to CFT columns

EXPERIMENTAL INVESTIGATION AND NONLINEAR FINITE ELEMENT ANALYSIS ON THE BEHAVIOR OF CONCRETE-FILLED SQUARE STEEL TUBULAR COLUMN CONNECTIONS

Model for Elasto-Plastic Analysis of Multistory and Highrise Steel-Concrete Composite Frame Systems

Research on Skeleton Curves of Steel-Concrete Composite Beams

Research on Hysteretic Model of Frame Structures of Steel Reinforced Concrete Beams and Angle-Steel Concrete Columns

Effect of Hysteretic Constitutive Models on Elasto-Plastic Seismic Performance Evaluation of Steel Arch Bridges

Elasto-plastic analysis for a steel frame-core wall structure with an eccentric tube

Cyclic loading test and nonlinear analysis on composite frame consisting of steel reinforced recycled concrete columns and steel beams

Modeling and Investigation of Elasto-Plastic Behavior of Steel–concrete Composite Frame Systems

A new model for analyzing nonlinear torsion behavior of concrete filled steel tube columns with rectangular section

Research on restoring force model of composite steel-concrete beams

Hysteresis Relationship in Concrete Filled Steel Tubular Columns and Steel Beam Planar Frames

Nonlinear Analysis of Mechanical Property for Steel Reinforced Concrete Composite Frame Structure

Numerical modeling on concrete structures and steel-concrete composite frame structures

Finite Element Analysis On Load-Bearing Behavior Of Concrete Filled Steel Tubular Composite Framese

Shear Deformation and Sliding-Based Fiber Beam-Column Model for Seismic Analysis of Reinforced Concrete Coupling Beams

Nonlinear analysis of composite steel-concrete beams with open sections under combined bending and torsion