Abstract:A steel–concrete composite box girder has good anti-seismic energy dissipation capacity, absorbs seismic energy, and reduces seismic action. It is very suitable for high-rise and super high-rise mega composite structure systems, which is in accordance with the condition of capital construction. In order to accurately study the elastic–plastic seismic response of the composite structure, the restoring force model of the building structure is the primary problem that needs to be solved. Previous research shows that shear connection degree, force ratio, and web height–thickness ratio are the major factors that influence composite box girder bearing capacity and seismic behavior. In this paper, low cycle vertical load tests of four steel–concrete composite box girders were conducted with different shear connection degrees and ratios of web height to thickness. The seismic behavior of a steel–concrete composite box girder was analyzed in depth, such as the hysteresis law, skeleton curve, and stiffness degradation law, etc. The influence of the shear connection degree and ratio of web height to thickness on seismic performance of the steel–concrete composite box girder was investigated. A three-fold line model of the bending moment–curvature skeleton curve of composite box girders was established. On the basis of experimental data and theoretical analysis, the formula of positive and negative stiffness degradation of composite box girders was obtained. Furthermore, the maximum point orientation hysteresis model of the bending moment–curvature of steel–concrete composite box girders was established. The calculated results of the restoring force model agree well with the experimental results. The accuracy of the proposed method is verified. The calculation method of the model is simple and clear, convenient for hand calculation, and suitable for engineering applications.

Research on restoring force model of composite steel-concrete beams

Experimental study on seismic behavior of assembled steel beam-PC column composite frames

Experimental Studies on Shear Strength of Steel–Concrete Composite Beams

Study on Restoring Force Models of Steel Beam-Column Connections with Composite Action

Experimental Study and Theoretical Analysis of Steel–Concrete Composite Box Girder Bending Moment–Curvature Restoring Force

Nonlinear Model for Seismic Analysis of Steel-Concrete Composite Beams

Accurate FEM of Steel-Concrete Composite Box Girder Bridge for Damage Identification Based on Dynamical Experimental Study

Seismic Performance Evaluation on Composite Frame Structures with T-shaped Multi-Cellular CFST Columns

A Unified Section-Based Restoring Force Model for Reinforced Concrete Coupling Beams Based on the XGBoost Model: Establishment, Validation and Application

Numerical modeling on concrete structures and steel-concrete composite frame structures

Model for Elasto-Plastic Analysis of Multistory and Highrise Steel-Concrete Composite Frame Systems

A Restoring Force Model for Prefabricated Concrete Shear Walls with Built-In Steel Sections

Research on Hysteretic Models of Composite Connections in Middle-High Strength Steel Frame Structures

Research on Shear Performance of Concrete-Filled Square Steel Tubular Column Connections

Experimental and Numerical Investigations of Composite Frames with Innovative Composite Transfer Beams

Vertical shear strength of composite beams with compact steel sections. Part Ⅰ: Composite beams subjected to sagging moment

Restoring force model of a modular steel-concrete composite column

Modeling and Investigation of Elasto-Plastic Behavior of Steel–concrete Composite Frame Systems

Shear Deformation and Sliding-Based Fiber Beam-Column Model for Seismic Analysis of Reinforced Concrete Coupling Beams

SOME ADVANCES IN CONVENTIONAL FIBER BEAM-COLUMN MODEL

Experimental Study on Steel-Concrete Composite Transfer Frame