Abstract:<p>A two-span and three-story of the frame specimen with a scale of 1:2.5 was tested and investigated under cyclic loading to study the seismic behavior on the composite frame consisting of steel reinforced recycled concrete columns and steel beams. After observing the loading process and failure modes, the mechanical properties of composite frame, such as the load–displacement hysteretic curves, skeleton curves, bearing capacity, interstory displacement angles, ductility, energy dissipation and stiffness degradation, were analysed in detail. On this basis, a finite element model of the composite frame which considered the constitutive properties of recycled concrete was established. The deformation diagram, stress nephogram and calculated skeleton curves of composite frame were obtained, and a nonlinear parameter analysis was also conducted. The experimental and numerical analysis results all show that the plastic hinges appeared at the end of steel beams firstly and then formed at the end of columns, which is a typical plastic hinge failure of frame. The hysteretic curves of frame are shuttle-shaped and full, and the descending section of the skeleton curves and stiffness degradation curves is relatively gentle. The average ductility coefficient, equivalent viscous damping coefficient and ultimate interstory displacement angle of frame are 3.205, 0.303 and 0.04, respectively. Therefore, the composite frame has good deformation, energy dissipation capacity and collapse resistance. The results of the nonlinear parameter analysis on the frame also exhibit that increasing the strength of steel products or recycled concrete is beneficial to the horizontal bearing capacity and lateral stiffness of frame. The maximum increase in the bearing capacity of frame can be 21.5% when the profile steel strength is increased from Q235 to Q390 and the recycled concrete strength is maintained at C40 within the parameters analysed, but the increase in material strength is unfavourable to the deformation capacity of frame. Increasing the axial compression ratio of columns in the frame obviously weakens the lateral displacement ductility of frame, which makes the frame unsafe under an earthquake. In addition, the bearing capacity and stiffness of frame increases with the increase in the linear stiffness of beams and columns. The research conclusions can provide a reference for the engineering application of this type of composite frame.</p>

Research on Hysteretic Model of Frame Structures of Steel Reinforced Concrete Beams and Angle-Steel Concrete Columns

A Ductility-Centred Analytical Model for Axially Restrained Double-Span Steel Beam Systems Subjected to Sudden Columns Loss

Improved Method of Giuffre-Menegotto-Pinto Hysteretic Constitutive Model

Improvement of hysteretic constitutive model for reinforcements considering buckling

Analysis on Hysteretic Behavior of Composite Frames with Concrete-Encased CFST Columns

Research on Hysteretic Models of Composite Connections in Middle-High Strength Steel Frame Structures

Hysteretic behavior of GFRP retrofitted RC bridge short columns

Numerical Simulation Analysis and the Program for Steel-Concret Composite Long Column in Eccentricaly-loaded

Hysteresis Relationship in Concrete Filled Steel Tubular Columns and Steel Beam Planar Frames

Numerical modeling on concrete structures and steel-concrete composite frame structures

Nonlinear Analysis of Mechanical Property for Steel Reinforced Concrete Composite Frame Structure

Research on Restoring Force Model Characteristics of Prestressed Steel Reinforced Concrete Frames

Seismic Performance Evaluation on Composite Frame Structures with T-shaped Multi-Cellular CFST Columns

Research on load-displacement hysteretic model of concrete-filled circular steel tubular beam-columns

Nonlinear Model for Seismic Analysis of Steel-Concrete Composite Beams

Analysis on Experimental Performance of Hysteretic Behavior of Concrete-Filled Circular CFRP Steel Tubular Beam-Column

Analytical behavior of frames with steel beams to concrete-filled steel tubular column

Model for Elasto-Plastic Analysis of Multistory and Highrise Steel-Concrete Composite Frame Systems

Test on Seismic Performance of Frame Structure of Steel Reinforced Concrete Beam and Steel-Tube Encased Concrete Column

Cyclic loading test and nonlinear analysis on composite frame consisting of steel reinforced recycled concrete columns and steel beams

Experimental and numerical investigation of the hysteretic behavior of reinforced concrete column-steel beam interior joints under low seismic intensity levels