Abstract:Due to many years of use,the structure、 material and so on of the bridge have changed.In addition,the detection technology is not very well,so it is not suitable to set up the cable-stayed bridge model which can reflect the bridge′s real action.It is necessary to amend the finite element model in order to comply with the results of the tests so as to fit the facts now.In this paper,a initial finite element model is built through the design information of the Yellow River Bridge which is the background of the project.A program which could amend the cable force is devoloped using ANSYS common software redevelopment.The program adjusts the initial strain and the mass element,so as to control the error between the calculated cable stress and the design stress less than 5%.In the process,it is found that the construction order in the modeling process has a important effect on the state of the accomplished bridge.The construction order should be simulated by the kill/birth element technology.In this paper the change of the deflection and cable force under several cases is aimed at,so as to set up the benchmark finite element model which could reflect the deflection and cable force changing.This model may establish the groundwork for monitoring the change of the cable force and the working status of the whole bridge.

Simulation and Analysis of Prestressed Concrete Cable Stayed Bridge under Dynamic Loading Based on ANSYS

Simulation of cantilever-casting construction of prestressed concrete cable-stayed bridge

Cable force adjustment and post-adjusting nonlinear analysis of a cable-stayed bridge based on ANSYS

Finite element analysis and test study of dynamic behavior of a cable-stayed bridge

Study on Typical Dynamic Characteristics of a Long-span Prestressed Concrete Cable-stayed Bridge

Spatial Simulating Analysis Of Prestressing Force Effect Of Long Span Prestressed Concrete Box Girder Bridge

Research on Spatial Effect of Prestressing Force in Long-Span Concrete Bridge

Analysis of Prestressed Concrete Bridge with Virtual Laminated Element Method

Spatial Analysis of Self-anchored Suspension Bridge and Its Experimental Study

Simulating analysis of cantilever casting of prestressed concrete bridge

Finite Element Model Updating for Cable-Stayed Bridge Based on Field Testing

Static Load Test and Calculation on Multi-tower Cable-Stayed Bridge with Tie-down Cables

Mechanical Analysis of Prestressed Concrete Partially Cable-Stayed Bridge with Corrugated Steel Webs

Nonlinear Static Analysis of Long-Span Cable-Stayed Bridges under Dead Loads

Three-dimensional Simulation Analysis of Prestressed Concrete Curved Beam Bridges During Construction

3-Dimensional finite element analysis of Xijian River Bridge on Guangzhou-Zhuhai intercity rapid rail transit

Dynamic analysis on reinforcement schemes of the prevailing railway bridge fabricated twin pole lighter pier

Dead Load Analysis Of Cable-Stayed Bridge

Filed Measurement of Dynamic Behavior of Cable and Pylon Structures of Runyang Bridge Cable-Stayed Spans

Dynamic Response Analysis of Cable-stayed Bridges Subjected to Moving Load

Dynamic Analysis and Test of Bridge Tower of Suspension Bridge Before and After Cable Installed