Abstract:Traditional liquid propellants like unsymmetrical dimethylhydrazine include several issues, such as toxicity, short storage time and preservation difficulty at low temperatures. For this reason, exploring green and stable propellant fuels is imperative in the development of propellants. Tetramethyl ethylenediamine (TMEDA) is considered to be a promising green propellant fuel with high specific impulse, non-toxicity, and long-term storage stability. Thus, investigating the combustion characteristics of TMEDA and constructing a detailed chemical kinetic mechanism are of fundamental importance in describing its combustion in computational fluid simulation. For this work, ignition delay times of TMEDA were measured in a shock tube at equivalent ratios of 0.5, 1.0 and 2.0, at pressures of 2, 10, and 20 bar, and in the temperature range of 870-1500 K with fixed fuel concentration at 2 %. After the reflected shock at 990-1500 K, the pyrolysis products of 2000 and 5000 ppm TMEDA in Argon were also measured at 5 and 10 bar conditions in a single pulse shock tube. In addition, laminar flame speeds of TMEDA were measured at initial pressures of 1 bar, initial temperatures of 333 and 353 K, and equivalence ratios ranging from 0.8 to 1.5 in a constant volume reactor. The experimental results were simulated using a detailed TMEDA kinetic mechanism. Reaction path analysis and sensitivity analysis were provided to clarify the chemical kinetics of TMEDA oxidation and pyrolysis. The current work provides new experimental data and fundamental analyses for understanding the oxidation and pyrolysis characteristics of TMEDA, and sheds light on optimal directions for future models.

Effects of Additives on Combustion Characteristics of Exo-Tetrahydrodicyclopentadiene

Experimental analysis on combustion, performance and emission characteristics of exo-THDCPD/diesel blends in a compression ignition engine

Catalysis Combustion Property and Mechanism of PDADN-RDX-CMDB Propellant

The Effect of Additives on the Detonation Hazard of Some Hydrocarbon‐air Mixtures

Effect Factors of the Combustion Property of Halogen-free Flame-retardant EPDM

Mechanistic study on oxidative degradation and deposition of exo-tetrahydrodicyclopentadiene

Effects of decabromodiphenyl ethane flame retardant on the combustion behavior and physical‐mechanical properties of chloroprene rubber: Experimental and molecular dynamic simulation

Combustion Characteristics of Nano Hydrotalcite Flame Retarded Ethylene Vinyl Acetate Copolymer

Effects of Content and Particle Size of TiH2 Powders on the Energy Output Rules of RDX Composite Explosives

The Influence of Dimethoxy Methane (dmm)/dimethyl Carbonate (DMC) Addition on a Premixed Ethane/oxygen/argon Flame

Effect of Hydroxyl Radical Precursor Addition on LTC-affected Detonation in DME– O_2 – CO_2 Mixtures

A Wide Ranging Experimental and Kinetic Modeling Study of TMEDA Pyrolysis and Oxidation

An Experimental and Kinetic Modeling Study on Dimethyl Carbonate (dmc) Pyrolysis and Combustion

Effect of the Oxygenated Additive DMC on the Combustionand Emission Performances of Diesel Engines

Exploring the High-Temperature Kinetics of Diethyl Carbonate (DEC) under Pyrolysis and Flame Conditions

Study on quantification methodology and analysis of chemical effects of combustion control based on fictitious reaction mechanism

Effect of ethyl‐bridged diphenylphosphine oxide on flame retardancy and thermal properties of epoxy resin

Combustion Inhibition Ability of Piperazine Phosphoramide Derivatives and Titanium Carbide on Epoxy Resin

Effect of Additive on the Heat Release Rate and Emissions of Hcci Combustion Engines Fueled with Ron90 Fuels

The Combination Of Expandable Graphite, Organic Montmorillonite, And Magnesium Hydrate As Fire-Retardant Additives For Ethylene-Propylene-Diene Monomer/Chloroprene Rubber Foams

An Experimental and Numerical Study of the Effects of Dimethyl Ether Addition to Fuel on Polycyclic Aromatic Hydrocarbon and Soot Formation in Laminar Coflow Ethylene/air Diffusion Flames