Abstract:Dimethyl ether (DME) is a highly reactive diesel substitute that can be used as a pilot fuel to ignite low- reactivity methane (CH4) in heavy-duty engines. To optimize the efficiency and emissions of CH4/DME dual-fuel engines, it is crucial to study the fundamental combustion characteristics of DME mixed with methane. This study focuses on the influence of CH4 addition on the low-temperature oxidation (LTO) preparation stage and the thermal ignition (TI) preparation stage of DME in the two-stage ignition process, as these two stages respectively control the ignition delay of the first and second stages. The comparison is made between pure DME and a 50% CH4 and 50% DME blended fuel, operating under thermodynamic conditions representing the engine in- cylinder environment at 30 atm pressure, 650K temperature, and a stoichiometric equivalence ratio. The results show that the addition of methane hardly affects the control mechanism of the two-stage ignition of DME. Specifically, the LTO preparation stage is still promoted by the increase in OH radicals in the DME’s low-temperature oxygenation pathways to form KET, and the second stage is still controlled by the H2O2 loop mechanism. The kinetic analysis also reveals that methane addition can compete for some of the OH radicals in the LTO preparation stage, which has a suppressing effect on ignition. However, in the TI preparation stage, methane can promote the loop reaction of OH→HO2→H2O2→OH and promote ignition. For the operating conditions studied here, although methane consumes a total of 7.24% prior to thermal ignition, it only consumes 0.63% of the total amount in the LTO preparation stage and 1.81% of the total amount in the TI preparation stage. This indicates that methane is mainly consumed in the LTO stage, accounting for 65% of the total methane consumption amount. It can be concluded that the kinetic effect of methane has a relatively small impact on the ignition delay of the DME, at least for the conditions investigated here. In other words, the dilution and thermal effects caused by adding methane are the main reasons for the prolonged time of LTO/TI preparation. Overall, more fundamental research is warranted to understand the role of methane in the two-stage ignition process of DME, which could facilitate the development of CH4/DME dual-fuel engines.

Effect of Hydroxyl Radical Precursor Addition on LTC-affected Detonation in DME– O_2 – CO_2 Mixtures

Effect of oxygen atom precursors addition on LTC-affected detonation in $${\hbox {DME}}{-}{\hbox {O}}_{2}{-}{\hbox {CO}}_{2}$$ mixtures

Effect of oxygen atom precursors addition on LTC-affected detonation in $${\hbox {DME}}{-}{\hbox {O}}_{2}{-}{\hbox {CO}}_{2}$$ DME - O 2 - CO 2 mixtures

Experimental and Kinetic Study of the Effects of CO2 and H2O Addition on PAH Formation in Laminar Premixed C2H4/O2/Ar Flames

Effects of Additives on Combustion Characteristics of Exo-Tetrahydrodicyclopentadiene

Experimental and Numerical Study on the Effect of Hydrogen Addition on Laminar Burning Velocity of Ethanol-Air Mixtures

Role of Low-Temperature Chemistry in Detonation of N-Heptane/oxygen/diluent Mixtures

Effects of Ozone Addition on Direct Detonation Initiation in Hydrogen/oxygen Mixtures

The Effect of Methane Addition on the Low-Temperature Oxidation Preparation and the Thermal Ignition Preparation of Dimethyl Ether under Representative Engine In-Cylinder Thermal Conditions

Effect of ozone addition and ozonolysis reaction on the detonation properties of C2H4/O2/Ar mixtures

The Effect of Additives on the Detonation Hazard of Some Hydrocarbon‐air Mixtures

Numerical Analysis of Hydrogen Peroxide Addition and Oxygen-Enriched Methane Combustion

Influence of Low-Temperature Chemistry on Steady Detonations with Curvature Losses

Effect of Ozone Addition on Curved Detonations

Effect of initial conditions on the inhibition process of H –O /air detonations using CF I, CO , and H O

Exploring the Chemical Kinetic Effects on the Direct Detonation Initiation in H 2 -O 2 -Ar Mixtures

Role of Low Temperature Chemistry in Detonation of n Heptane/Oxygen Mixtures

Pulsating and cellular instabilities of hydrogen–oxygen detonations with ozone sensitization

Effect of initial temperature and H2 addition on explosion characteristics of H2-poor/CH4/air mixtures

Direct Numerical Simulation of H 2 Effect on Multistage Autoignition of DME / Air Mixture under HCCI Conditions

Exploring the chemical kinetic effects on the direct detonation initiation in H2-O2-Ar mixtures