Abstract:Failure behavior of epoxy coating/low alloy steel systems applied with cathodic polarization at 0.1 MPa and 15 MPa was investigated based on a deep−sea environment simulation test device. The results showed that the diffusion of water into the coating was significantly accelerated by the high hydrostatic pressure under the same polarization potential, and the time of water uptake of the coating that reached saturation was shortened; the coating's physical structure was significantly affected by the high hydrostatic pressure; the generation of highly conductive Fe 3 O 4 was promoted in the corrosion products, which accelerated the metal corrosion process. Under the same hydrostatic pressure, with the negative shift of the polarization potential, the coating protective performance was significantly reduced and metal corrosion was mitigated to a certain extent; the water transport behavior showed a tendency to shorten the time of water uptake of the coating that reached saturation and lengthen the duration of the saturation state, which may be related to a more severe degree of cathodic delamination and the increase of water consumption for cathodic reactions under the coating. In addition, the increase of the weakly conductive α−Fe 2 O 3 content in the corrosion products may cause a reduction in the cathodic protection current at the same polarization potential, resulting in the reduction of the protection effect on the metal.

INFLUENCE OF DEEP-SEA ENVIRONMENT ON CORROSION BEHAVIOR OF PURE NICKEL:INFLUENCE OF HYDROSTATIC PRESSURES ON PERFORMANCE OF PASSIVE FILM ON PURE NICKEL

Influence of Ni Addition on Corrosion Performance of Medium-temperature Filler Metal with Low Cu Content for Al Brazed Joints

Effect of hydrostatic pressure on galvanic corrosion of low-alloy steel in simulated deep-sea environments

Electrochemical corrosion behavior of high strength steel in simulated deep-sea environment under different hydrostatic pressure

Influence of Deep-Sea Hydrostatic Pressure on the Tribocorrosion Behavior and Mechanism of La2O3-TiB2-Ni Coating

Effect of cathodic polarizations on the failure behavior of epoxy coating/low alloy steel systems under high hydrostatic pressure

The Effects of Hydrostatic Pressure on Corrosion of Coated Stainless Steel

Effects Of Nitrogen On The Passivation Of Nickel-Free High Nitrogen And Manganese Stainless Steels In Acidic Chloride Solutions

Corrosion of high-strength steel in 3.5% NaCl solution under hydrostatic pressure: understanding electrochemical corrosion with tensile stress coupling

Effect of Dissolved Oxygen on Pitting Corrosion Behavior of Low-Alloy Steel under Hydrostatic Pressure

Corrosion Mechanisms of Stainless Steel and Nickel Base Alloys in High Temperature High Pressure Water

Corrosion of high-strength steel in 3.5% NaCl solution under hydrostatic pressure: Initial corrosion with tensile stress coupling

Effect of hydrostatic pressure on the galvanic corrosion of 90/10 Cu-Ni alloy coupled to Ti6Al4V alloy

In-Situ Electrochemical Corrosion Behavior of Nickel-Base 718 Alloy under Various CO2 Partial Pressures at 150 and 205 °C in NaCl Solution

Effect of Ni on the oxidation behavior of corrosion products that form on low alloy steel exposed to a thin electrolyte layer environment

Influence of Electrodeposition Conditions on the Microstructure and Corrosion Resistance of Zn–Ni Alloy Coatings from a Deep Eutectic Solvent

Effect of Hydrostatic Pressure on Passivating Power of Corrosion Layers Formed on 6061 T6 Aluminium Alloy in Sea Water

Effect of hydrostatic pressure on the pitting corrosion of 17-4PH martensitic stainless steel

An Investigation on Corrosion Behavior and Mechanism of CoCrFeNi HEA in NaCl Solution under Direct Current Interference

Tribocorrosion of 316L stainless steel by in-situ electrochemical methods under deep-sea high hydrostatic pressure environment

Microstructure and Corrosion Behavior of Electrodeposited Nickel Prepared from a Sulphamate Bath